K.D. Lawson I.H. Coffey K.M. Aggarwal F.P. Keenan JET-EFDA Contributors
The main populating and depopulating mechanisms of the excited energy levels of ions in plasmas with densities
PublishedI Monakhov M Graham T Blackman S Dowson F Durodie P Jacquet J Lehmann M-L Mayoral M P S Nightingale C Noble H Sheikh M Vrancken A Walden A Whitehurst E Wooldridge JET-EFDA Contributors
A load-tolerant External Conjugate-T (ECT) impedance matching system for two A2 Ion Cyclotron Resonance Heating (ICRH) antennas has been successfully put into operation at JET. The system allows continuous injection of the RF power into plasma in the presence of strong antenna loading perturbations caused by Edge Localized Modes (ELMs). Reliable EC…
PublishedHyun-Tae Kim A.C.C. Sips EFDA-JET Contributors
This paper presents the DYON simulations of the plasma burn-through phase at Joint European Torus (JET) with the ITER-like wall. The main purpose of the study is to validate the simulations with the ITER-like wall, made of beryllium. Without impurities, the burn-through process of a pure deuterium plasma is described using DYON simulations, and the…
PublishedA. Widdowson C.F. Ayres S. Booth J.P. Coad A. Hakola K. Heinola D. Ivanova S. Koivuranta J. Likonen M. Mayer M. Stamp JET-EFDA Contributors
A complete global balance for carbon in JET requires knowledge of the net erosion in the main chamber, net deposition in the divertor and the amount of dust and flakes collecting in the divertor region. This paper describes a number of measurements on aspects of this global picture. Profiler measurements and cross section microscopy on tiles that w…
PublishedA.G. Meigs S. Brezinsek M. Clever A. Huber S. Marsen C. Nicholas M.Stamp K-D Zastrow JET EFDA Contributors
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project involves a change in JET from a carbon dominated machine to a beryllium and tungsten dominated machine with residua…
PublishedHyun-Tae Kim A.C.C. Sips W. Fundamenski EFDA-JET Contributors
Plasma Surface Interaction(PSI) effects on plasma burn-through are compared for the carbon wall and the ITER-Like Wall(ILW) at JET. For the carbon wall, the radiation barrier and C2+ influx have a significant linear correlation whereas the radiation barrier in the ILW does not have such a linear correlation with Be1+ influx. The JET data are explai…
PublishedP. Jacquet F. Marcotte L. Colas G. Arnoux V. Bobkov Y. Corre S. Devaux J-L. Gardareine E. Gauthier M. Graham E. Lerche M-L. Mayoral I. Monakhov F.Rimini A. Sirinelli D. Van Eester JET EFDA Contributors
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of …
PublishedC. Thomser V. Bailescu S. Brezinsek J. W. Coenen H. Greuner T. Hirai J. Linke C. P. Lungu H. Maier G. Matthews Ph. Mertens R. Neu V. Philipps V. Riccardo M. Rubel C. Ruset A. Schmidt I. Uytdenhouwen JET EFDA Contributors
The chosen materials for plasma facing components for the deuterium/tritium phase of ITER are beryllium and tungsten. These materials have already been widely investigated in various devices like ion beam or electron beam tests. However, the operation of this material combination in a large tokamak including plasma wall interaction, material degrad…
PublishedHyun-Tae Kim A.C.C. Sips EFDA-JET Contributors
This paper presents the DYON simulations of the plasma burn-through phase at Joint European Torus (JET) with the ITER-like wall. The main purpose of the study is to validate the simulations with the International Thermonuclear Experimental Reactor (ITER)-like wall, made of beryllium. Without impurities, the burn-through process of a pure deuterium …
PublishedM. Gelfusa A. Murari P. Gaudio A. Boboc M. Brombin F. P. Orsitto E. Giovannozzi JET EFDA Contributors
An equivalent model of JET polarimeter is presented, which overcomes the drawbacks of previous versions of the fitting procedures used to provide calibrated results. First of all the signal processing electronics has been simulated, to confirm that it is still working within the original specifications. Then the effective optical path of both the v…
Published