-
UKAEA-CCFE-PR(18)542018
Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to reproduce experimental behaviour of W accumulation, integrated modelling of main ion heat and particle transport is a vital prerequisite. For the first time, the quasilinear …
-
UKAEA-CCFE-PR(18)522018
Partial detachment is the desired regime for the baseline burning plasma scenario in ITER and next-step devices, as it allows to disspate the majority of the energy carried by charged particles through the scrape-off-layer (SOL) and thus avoids localised heat flux deposition in the divertor region. The COMPASS tokamak is equipped with an open diver…
-
UKAEA-CCFE-PR(18)232018
Ray-tracing techniques are applied to bolometry, a diagnostic particularly sensitive to machine geometry due to the effect of volume sampling. Sightlines from the ASDEX-Upgrade bolometer foils were ray-traced with a path tracing algorithm, where the optical path is represented by a statistical bundle of ray paths connecting the foil surface with th…
-
CCFE-PR(17)702017
It has been previously demonstrated in (Li et al 2016 Nuclear Fusion 56 126007) that the optimum upper/lower coil phase shift ΔΦopt for alignment of RMP coils for ELM mitigation depends sensitively on q95, and other equilibrium plasma parameters. Therefore, ΔΦopt is expected to vary widely during the current ramp …
-
2017
Extensive modelling efforts of the plasma response to the resonant magnetic perturbation fields, utilized for controlling the edge localized mode (ELM), help to identify the edge-peeling response as a key factor, which correlates to the observed ELM mitigation in several tokamak devices, including MAST, ASDEX Upgrade, EAST, and HL-2A. The recently …
-
CCFE-PR(17)182016
Clear filamentary structures are observed at the edge of tokamak plasmas. These filaments are ejected out radially and carry plasma in the far Scrape Off Layer (SOL) region, where they are responsible for producing most of the transport. A study has been performed of the characteristics of the filaments observed in L-mode plasma on MAST, using visi…
-
CCFE-PR(16)272016
Retarding field energy analysers (RFEAs) have been used to compare the ion temperature ( T i ) of large plasma filaments with the background plasma (composed of small scale filaments) at the midplane and divertor target in L mode discharges in the Mega Amp Spherical Tokamak (MAST). At low densities, at the midplane and divertor, at distances from 2…
-
CCFE-PR(16)092016
The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are mitigated by external resonant magnetic perturbations (RMPs). In this experiment relevant dimensionless paramete…
-
CCFE-PR(16)072016
The plasma response to the vacuum resonant magnetic perturbation (RMP) fields, produced by the ELM control coils in ASDEX Upgrade experiments, is computationally modelled using the MARS-F/K codes [Liu Y.Q. et al 2000 Phys. Plasmas 7 3681; Liu Y.Q. et al 2008 Phys. Plasmas 15 112503]. A systematic investigation is carried out, considering various pl…
-
CCFE-PR(15)532015
Filamentary transport across the scrape off layer is a key issue for the design and operation of future devices, such as ITER, DEMO and MAST-U, as it sets the power loadings to the divertor and first wall of the machine. Analysis has been performed on L mode filaments in MAST in order to gain an understanding of the spatial structure and attempt to…
Showing 11 - 20 of 20 UKAEA Paper Results