Showing 1 - 10 of 28 Journals Results
2020
UKAEA-CCFE-PR(20)114
K. K. Kirov E. Belonohy C. D. Challis J. Eriksson D. Frigione L. Garzotti L. Giacomelli J. Hobirk A. Kappatou D. Keeling D. King E. Lerche P. J. Lomas M. Nocente C. Reux F. G. Rimini A. C. C. Sips D. Van Eester JET Contributors
Achieving high neutron yields in today’s fusion research relies on high power auxiliary heating in order to attain required core temperatures. This is usually achieved by means of high Neutral Beam (NB) and Radio Frequency (RF) power. Application of NB power is accompanied by production of fast beam ions and associated Beam-Target (BT) reactio…
Preprint Published2019
UKAEA-CCFE-PR(20)127
S. Saarelma L. Frassinetti P. Bilkova C.D. Challis A. Chankin R. Fridström L. Garzotti L. Horvath C.F. Maggi JET Contributors
The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict type I ELMy pedestals of a large database JET-ILW (ITER-like wall) at the similar accuracy as is obtained when the experimental global plasma b is used as input. The neutral penetration …
Preprint Published2019
UKAEA-CCFE-PR(20)19
D. B. King E. Viezzer I. Balboa M. Baruzzo E. Belonohy J. Buchanan I.S. Carvalho K. Cave-Ayland I. Coffey C.D. Challis E.G. Delabie L. Garzotti S. Hall J.Hillesheim L. Horvath E. Joffrin D. Keeling K. Kirov C.F. Maggi M. Maslov S. Saarelma S. Silburn E.R. Solano M. Stamp D. Valcarcel H.Weisen
A study of mixed hydrogen-deuterium H-mode plasmas has been carried out in JET-ILW to strengthen the physics basis for extrapolations to JET D-T operation and to support the development of strategies for isotope ratio control in future experiments. Variations of input power, gas fuelling and isotopic mixture were performed in H-mode plasmas of the…
Preprint Published2018
UKAEA-CCFE-PR(20)64
D. Iglesias W. Arter I. Balboa P. Bunting C. Challis J.W. Coenen Y. Corre S. Esquembri S. Jachmich K. Krieger G.F. Matthews R.A. Pittsh V. Riccardo M.L. Richiusa M. Porton F. Rimini S. Silburn V.K. Thompson R. Otin D. Valcarcel L. Vitton-Mea Z. Vizvary J. Williams JET contributors
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
Preprint2019
UKAEA-CCFE-PR(20)08
C.D. Challis S. Brezinsek I. Coffey M. Fontana N. Hawkes D. Keeling D. King G. Pucella E. Viezzer JET Contributors
The initial current ramp phase of JET hybrid plasmas is used to optimise the target q-profile for main heating to allow access to high beta and avoid MHD instabilities. Mixed protium-deuterium experiments, carried out at JET since the installation of the beryllium-tungsten wall, have shown that the q-profile evolution during this Ohmic phase varies…
Preprint Published2019
UKAEA-CCFE-PR(19)75
F.J. Casson H. Patten C. Bourdelle S. Breton J. Citrin F. Koechl C. Angioni Y. Baranov R. Bilato E.A. Belli C.D. Challis G. Corrigan A. Czarnecka O. Ficker L. Frassinetti L. Garzotti M. Goniche J.P. Graves T. Johnson K. Kirov P. Knight E. Lerche M. Mantsinen J. Mylnar M. Sertoli M. Valisa
The evolution of the JET high performance hybrid scenario, including central accumulation of the tungsten (W) impurity, is reproduced with predictive multi-channel integrated modelling over multiple confinement times using first-principle based models. 8 transport channels are modelled predictively, with self-consistent sources, radiation and magne…
Preprint Published2019
UKAEA-CCFE-PR(19)21
Luca Garzotti C. Challis R. Dumont D. Frigione J. Graves E Lerche J. Mailloux M. Mantsinen F. Rimini F. Casson A. Czarnecka J. Eriksson R. Felton L. Frassinetti D. Gallart J. Garcia C. Giroud E. Joffrin H.-T. Kim N. Krawczyk M. Lennholm P. Lomas C. Lowry L. Meneses I. Nunes C. M. Roach M. Romanelli S. Sharapov S. Silburn A. Sips E. Stefanikova M. Tsalas D. Valcarcel M. Valovic JET contributors
The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall (ILW) and will benefit from an extended and improved set of diagnostics and higher additional heating …
Preprint Published2018
UKAEA-CCFE-PR(18)65
D. Gallart M. Mantsinen C. Challis D. Frigione J. Graves E. Belonohy F. Casson A. Czarnecka J. Eriksson J. Garcia M. Goniche C. Hellesen J. Hobirk P. Jacquet E. Joffrin N. Krawczyk D. King M. Lennholm E. Lerche E. Pawelec X. Sáez M. Sertoli G. Sips E. Solano M. Tsalas P. Vallejos Olivares M. Valisa
During the 2015-2016 JET campaigns many efforts have been devoted to the exploration of high-performance plasma scenarios envisaged for DT operation in JET. In this paper we review various key recent hybrid discharges and model the combined ICRF+NBI heating. These deuterium discharges with deuterium beams had the ICRF antenna frequency tuned to mat…
Preprint Published2018
UKAEA-CCFE-PR(18)81
Krassimir Kirov Yu. Baranov I.S. Carvalho C.D. Challis J. Eriksson D. Frigione L. Garzotti J. Graves P. Jacquet D.L. Keeling E. Lerche P.J. Lomas C. Lowry M. Mantsinen F. Rimini and JET Contributors
Fast ion synergistic effects were studied by predictive modelling of JET best performing pulses for various levels of Neutral Beam (NB) and Radio Frequency (RF) power. Calculated DD neutron yields were analysed with the intention of separating the impact of sheer synergistic effects due to changes in fast ion (FI) distribution function (DF) from su…
Preprint Published2018
UKAEA-CCFE-PR(18)13