Journals

Showing 1 - 10 of 32 Journals Results
2020
UKAEA-CCFE-PR(20)114

Achieving high neutron yields in today’s fusion research relies on high power auxiliary heating in order to attain required core temperatures. This is usually achieved by means of high Neutral Beam (NB) and Radio Frequency (RF) power. Application of NB power is accompanied by production of fast beam ions and associated Beam-Target (BT) reactions.…

Preprint
2020
UKAEA-CCFE-PR(20)19

A study of mixed hydrogen-deuterium H-mode plasmas has been carried out in JET-ILW to strengthen the physics basis for extrapolations to JET D-T operation and to support the development of strategies for isotope ratio control in future experiments. Variations of input power, gas fuelling and isotopic mixture were performed in H-mode plasmas of…

Preprint Purchase
2020
UKAEA-CCFE-PR(20)08

The initial current ramp phase of JET hybrid plasmas is used to optimise the target q-profile for main heating to allow access to high beta and avoid MHD instabilities. Mixed protium-deuterium experiments, carried out at JET since the installation of the beryllium-tungsten wall, have shown that the q-profile evolution during this Ohmic phase varies…

Preprint Purchase
The published version of this paper is currently under embargo and will be available on 10/07/2021
2020
UKAEA-CCFE-PR(19)11

Increased neutralisation and hence injected neutral beam power can be achieved by increasing the neutraliser target. This has the potential to increase the loading on the ion source backplate due to backstreaming electrons. Measurements of the backplate power loading due to backstreaming electrons are presented for the JET EP2 neutral beam injec…

Preprint Purchase
The published version of this paper is currently under embargo and will be available on 20/07/2021
2019
UKAEA-CCFE-PR(19)62

The pedestal structure, ELM losses and linear MHD stability are analysed in a series of JET-ILW H and D type I ELMy H-mode plasmas. The pedestal pressure (pPED) is typically higher in D than in H at the same input power, with the difference mainly due to lower density in H than in D. At the same input power, the pedestal electron pressur…

Preprint
2018
UKAEA-CCFE-PR(18)65

During the 2015-2016 JET campaigns many efforts have been devoted to the exploration of high-performance plasma scenarios envisaged for DT operation in JET. In this paper we review various key recent hybrid discharges and model the combined ICRF+NBI heating. These deuterium discharges with deuterium beams had the ICRF antenna frequency tuned to mat…

Preprint Published
2018
UKAEA-CCFE-PR(18)28

Fishbones are ubiquitous in high-performance JET plasmas and are typically considered to be unimportant for scenario design. However, during recent high-performance hybrid experiments, sporadic and explosive fishbones have been observed which correlate with a reduction in performance and main chamber hotspots. Clear evidence has been obtained of fu…

Preprint Published
2018
UKAEA-CCFE-PR(18)15

Particle transport is of a great importance for understanding physics of tokamak plasmas and planning future experiments on larger machines such as ITER. The subject was intensively studied in the past, particularly in relation to density peaking and presence of anomalous inward particle convection in L- and H-mode. While in the L-mode case presenc…

Preprint Published