Journals

Showing 1 - 10 of 12 Journals Results
2020
UKAEA-CCFE-PR(20)82

Non-linear MHD simulations play an essential role in active research and understanding of tokamak plasmas for fusion energy. The development of MHD codes like JOREK is a key aspect of this research effort. In this paper, we present a fully-working version of the full-MHD model in JOREK, a significant advancement from the reduced-MHD model used for …

Preprint
2020
UKAEA-CCFE-PR(20)07

ELM simulations for the MAST-U Super-X tokamak have been obtained, using the JOREK code. The JOREK visco-resistive MHD model has been used to obtain comparisons of divertor configurations. The simulations show a factor 10 decrease in the peak heat flux to the outer target of the Super-X in comparison to a conventional divertor configuration. A ro…

Preprint
2019
UKAEA-CCFE-PR(19)60

Toroidal Alfven Eigenmode (TAE) excitation can be caused by fusion-born or Ion Cyclotron Resonance and neutral beam heating fast particles through wave-particle resonance. TAEs may affect fast particle confinement, reduce heating and current drive efficiency, cause damage to the first wall, and decrease overall plasma performance. Excitation of TA…

Preprint
2017
CCFE-PR(17)13

Future devices like JT-60SA, ITER and DEMO require quantitative predictions of pedestal density and temperature levels, as well as inter-ELM and ELM divertor heat fluxes, in order to improve global confinement capabilities while preventing divertor erosion/melting in the planning of future experiments. Such predictions can be obtained from dedicate…

Preprint Published
2016
CCFE-PR(16)19

ELM control may be essential to develop ITER scenarios with a reasonable lifetime of divertor components, whilst ELM pacing may be essential to develop stationary ITER scenarios with a tungsten divertor. Resonant magnetic perturbations (RMPs) have mitigated ELMs in high collisionality plasmas in JET. The efficacy of RMPs in mitigating the ELMs is f…

Preprint Published
2016
CCFE-PR(16)18

A subset of JET ITER-like wall (ILW) discharges, combining electron density and temperature as well as divertor heat flux measurements, has been collected for the validation of non-linear MHD simulations of Edge-Localised-Modes (ELMs). This permits a quantitative comparison of simulation results against experiments, which is required for the valida…

Preprint Published
2015
CCFE-PR(15)114

The linear and quasi-linear plasma response to the n = 3 and n = 4 (n is the toroidal mode number) resonant magnetic perturbation (RMP) fields, produced by the in-vessel edge localized mode control coils, is numerically studied for an ITER 15MA H-mode baseline Scenario. Both single fluid and fluid-kinetic hybrid models are used. The inclusion of dr…

Preprint Published
2014

The type I ELMy H-mode is the baseline operating scenario for ITER. While it is known that the type I ELM ultimately results from the peeling-ballooning instability, there is growing experimental evidence that a mode grows up before the ELM crash that may modify the edge plasma, which then leads to the ELM event due to the peeling-ballooning mode. …

Published
2014

The three dimensional plasma boundary displacements induced by applied nonaxisymmetric magnetic perturbations have been measured in ASDEX Upgrade, DIII-D, JET, MAST and NSTX. The displacements arising from applied resonant magnetic perturbations (RMPs) are measured up to ±5% of the minor radius in present day machines. Good agreement can be found …

Published
2013

The interaction of static Resonant Magnetic Perturbations (RMPs) with the plasma flows is modeled in toroidal geometry, using the non-linear resistive MHD code JOREK, which includes the X-point and the scrape-off-layer. Two-fluid diamagnetic effects, the neoclassical poloidal friction and a source of toroidal rotation are introduced in the model to…

Published