UKAEA Journals

Showing 1 - 10 of 13 Journals Results
2021
UKAEA-CCFE-PR(21)13

Tridiagonal matrix inversion is an important operation with many applications. It arises frequently in solving discretized one-dimensional elliptic partial differential equations, and forms the basis for many algorithms for block tridiagonal matrix inversion for discretized PDEs in higher-dimensions. In such systems, this operation is often the sca…

Preprint
2020
UKAEA-CCFE-PR(20)78

During an accident with loss-of-coolant and air ingress in DEMO, the temperature of tungsten first wall cladding may exceed 1000oC and remain for months leading to tungsten oxidation. The radioactive tungsten oxide can be mobilized to the environment at rates of 10 – 150 kg per hour. Smart tungsten-based alloys are under develop…

Preprint Purchase
2020
UKAEA-CCFE-PR(20)72

Self-ion bombardment of pure tungsten with ion energies of 2 MeV is used to mimic the defects created by neutrons in a fusion reactor. Electron microscopy is used to characterize the microstructure of samples. Thermal Desorption Spectrometry (TDS) is performed on deuterium implanted samples in order to estimate deuterium inventory as function of…

Preprint
2019
UKAEA-CCFE-PR(19)77

Internal flow behaviour during melt-pool-based metal manufacturing remains unclear and hinders progression to process optimisation. In this contribution, we present direct time-resolved imaging of melt pool flow dynamics from a high-energy synchrotron radiation experiment. We track internal flow streams during arc welding of steel and measure insta…

Preprint Published
2015
CCFE-PR(15)72

The Synthetic Aperture Microwave Imaging (SAMI) diagnostic has conducted proof-of-principle 2D Doppler backscattering (DBS) experiments on MAST. SAMI actively probes the plasma edge using a wide ( 40° vertical and horizontal) and tuneable (10-35.5 GHz) beam. The Doppler backscattered signal is digitised in vector form using an array of eight Vival…

Preprint Published
2014

The DEMO Active Maintenance Facility (AMF) would be used for the storage, handling and processing of In- Vessel Components (IVC) throughout their time on site, the only exception being the time that they are installed in the vessel. It is anticipated that all handling operations associated with used components will have to be carried out using remo…

Published
2013

Remote handling operations at JET have encountered many challenges to achieve the installation of the ILW beryllium sliced wall during the Enhanced Performance stage 2 (EP2) shutdown of JET. This was a demanding and challenging activity which was based on the experience gained from a period of over 15 years (20000 hrs. operations) of JET In-Vessel …

Published
2013

The thermal performance of high heat flux components in a fusion reactor could be enhanced significantly by the use of nanofluid coolants, suspensions of a liquid with low concentrations of solid nanoparticles. However, before they are considered viable for fusion, the long-term behaviour of nanofluids must be investigated. This paper reports an ex…

Published
2013

In Europe the work on the specification and design of a Demonstration Power Plant (DEMO) is being carried out by EFDA in the Power Plant Physics and Technology (PPP&T) programme. DEMO will take fusion from experimental research into showing the potential for commercial power generation. During the fusion reaction, components in the tokamak become h…

Published
2013

EDFA, as part of the Power Plant Physics and Technology programme, has been working on the pre-conceptual design of a Demonstration Power Plant (DEMO). As part of this programme, a review of the remote maintenance strategy considered maintenance solutions compatible with expected environmental conditions, whilst showing potential for meeting the pl…

Published