UKAEA Journals

Showing 1 - 10 of 29 Journals Results
2021
UKAEA-CCFE-PR(21)35

Sustained operation of high-performance, ITER-baseline scenario plasmas at the high levels of input power (~< 40MA) required to achieve ~ 15 MW of D-T fusion power in JET-ILW requires careful optimisation of the fuelling to avoid an unacceptable disruption rate due to excessive radiation, primarily from W impurities, which are sputter…

Preprint
2021
UKAEA-CCFE-PR(21)23

The work reported in this paper has already been presented internally by placement student Jacob Young at a MAST Physics and Technology meeting on December 17 2020. Therefore it does not require a paper review presentation. Please also note that the paper is proposed for inclusion in a special issue of Plasma Research Express linked to the recent I…

Preprint
2020
UKAEA-CCFE-PR(20)114

Achieving high neutron yields in today’s fusion research relies on high power auxiliary heating in order to attain required core temperatures. This is usually achieved by means of high Neutral Beam (NB) and Radio Frequency (RF) power. Application of NB power is accompanied by production of fast beam ions and associated Beam-Target (BT) reactio…

Preprint Published
2019
UKAEA-CCFE-PR(20)127

The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict type I ELMy pedestals of a large database JET-ILW (ITER-like wall) at the similar accuracy as is obtained when the experimental global plasma b is used as input. The neutral penetration …

Preprint Published
2019
UKAEA-CCFE-PR(20)23

To ensure optimal plasma performance at high Qfus for the baseline scenario foreseen for the International Tokamak Experimental Reactor (ITER), fuelling requirements, in particular for non-stationary phases, need to be assessed by means of integrated modelling due to different expected fuelling behaviour and additional challenges that need to be…

Preprint Purchase
2019
UKAEA-CCFE-PR(20)19

A study of mixed hydrogen-deuterium H-mode plasmas has been carried out in JET-ILW to strengthen the physics basis for extrapolations to JET D-T operation and to support the development of strategies for isotope ratio control in future experiments. Variations of input power, gas fuelling and isotopic mixture were performed in H-mode plasma…

Preprint Purchase
2019
UKAEA-CCFE-PR(19)75

The evolution of the JET high performance hybrid scenario, including central accumulation of the tungsten (W) impurity, is reproduced with predictive multi-channel integrated modelling over multiple confinement times using first-principle based models. 8 transport channels are modelled predictively, with self-consistent sources, radiation and magne…

Preprint Published
2019
UKAEA-CCFE-PR(19)25

Deuterium pellets are injected into initially pure hydrogen H-mode plasma in order to control H:D isotope mixture. The pellets are deposited in outer 20% of minor radius, similar to that expected in ITER creating transiently hollow electron density profiles. The isotope mixture of H:D ~ 45:55% is obtained in the core with pellet fuelling throughput…

Preprint Published
2019
UKAEA-CCFE-PR(19)23

We have modelled self-consistently the most efficient ways to fuel ITER Hydrogen (H), Helium (He) and Deuterium-Tritium (DT) plasmas with gas and/or pellet injection with the integrated core and 2D SOL/divertor suite of codes JINTRAC. As far as we are aware, for ITER this is the first time modelling of the entire plasma has been carried out to foll…

Preprint
2019
UKAEA-CCFE-PR(19)21

The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall (ILW) and will benefit from an extended and improved set of diagnostics and higher additional heating …

Preprint Published