UKAEA Journals

Showing 1 - 10 of 17 Journals Results
2019
UKAEA-CCFE-PR(20)127

The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict type I ELMy pedestals of a large database JET-ILW (ITER-like wall) at the similar accuracy as is obtained when the experimental global plasma b is used as input. The neutral penetration …

Preprint Published
2019
UKAEA-CCFE-PR(19)75

The evolution of the JET high performance hybrid scenario, including central accumulation of the tungsten (W) impurity, is reproduced with predictive multi-channel integrated modelling over multiple confinement times using first-principle based models. 8 transport channels are modelled predictively, with self-consistent sources, radiation and magne…

Preprint Purchase
2019
UKAEA-CCFE-PR(19)62

The pedestal structure, ELM losses and linear MHD stability are analysed in a series of JET-ILW H and D type I ELMy H-mode plasmas. The pedestal pressure (pPED) is typically higher in D than in H at the same input power, with the difference mainly due to lower density in H than in D. At the same input power, the pedestal electron pressur…

Preprint Purchase
The published version of this paper is currently under embargo and will be available on 09/03/2022
2019
UKAEA-CCFE-PR(19)25

Deuterium pellets are injected into initially pure hydrogen H-mode plasma in order to control H:D isotope mixture. The pellets are deposited in outer 20% of minor radius, similar to that expected in ITER creating transiently hollow electron density profiles. The isotope mixture of H:D ~ 45:55% is obtained in the core with pellet fuelling throughput…

Preprint Published
2019
UKAEA-CCFE-PR(19)21

The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall (ILW) and will benefit from an extended and improved set of diagnostics and higher additional heating …

Preprint Published
2018
UKAEA-CCFE-PR(18)3

Recent studies have shown that on JET with the Be/W ITER-like wall (JET-ILW) in high beta discharges with high D2 gas rates the inter-ELM temperature pedestal growth is saturated half way through the ELM cycle, leading to plasmas with reduced confinement, and that the linear MHD stability of these pedestals is inconsistent with the Peeling-Ballooni…

Preprint Published
2017
CCFE-PR(17)13

Future devices like JT-60SA, ITER and DEMO require quantitative predictions of pedestal density and temperature levels, as well as inter-ELM and ELM divertor heat fluxes, in order to improve global confinement capabilities while preventing divertor erosion/melting in the planning of future experiments. Such predictions can be obtained from dedicate…

Preprint Published
2017
CCFE-PR(17)12

This paper presents for the first time a statistical validation of predictive TRANSP simulations of plasma temperature using two transport models, GLF23 and TGLF, over a database of 80 baseline H-mode discharges in JET-ILW. While the accuracy of the predicted Te with TRANSP-GLF23 is affected by plasma collisionality, the dependency of predictions o…

Preprint Published
2016
CCFE-PR(16)18

A subset of JET ITER-like wall (ILW) discharges, combining electron density and temperature as well as divertor heat flux measurements, has been collected for the validation of non-linear MHD simulations of Edge-Localised-Modes (ELMs). This permits a quantitative comparison of simulation results against experiments, which is required for the valida…

Preprint Published
2016
CCFE-PR(16)80

The Joint European Torus (JET) high resolution Thomson scattering (HRTS) system measures radial electron temperature and density profiles. One of the key capabilities of this diagnostic is measuring the steep pressure gradient, termed the pedestal, at the edge of JET plasmas. The pedestal is susceptible to limiting instabilities, such as Edge Local…

Preprint Published