UKAEA Journals

Showing 1 - 10 of 30 Journals Results
2021
UKAEA-CCFE-PR(21)26

The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994-5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favouri…

Preprint Published
2018

The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994–5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favou…

Published
2019
UKAEA-CCFE-PR(20)08

The initial current ramp phase of JET hybrid plasmas is used to optimise the target q-profile for main heating to allow access to high beta and avoid MHD instabilities. Mixed protium-deuterium experiments, carried out at JET since the installation of the beryllium-tungsten wall, have shown that the q-profile evolution during this Ohmic phase varies…

Preprint Published
2018
UKAEA-CCFE-PR(18)57

A theoretical model for isotopologues of beryllium monohydride, BeH, BeD and BeT, A 2 Π to X 2 Σ + visible and X 2 Σ + to X 2 Σ + infrared rovibronic spectra. The MARVEL procedure is used to compute empirical rovibronic energy levels for BeH, BeD and BeT, using experimental transition data for the X 2 Σ + , A 2 Π, and C 2 Σ + states. The ene…

Preprint Published
2016

Five ELMy H-mode Ne seeded JET pulses have been simulated with the self-consistent core-SOL model COREDIV. In this five pulse series only the Ne seeding rate was changed shot by shot, allowing a thorough study of the effect of Ne seeding on the total radiated power and of its distribution between core and SOL to be made. The increase in the simulat…

Published
2016

There is experimental evidence that the pedestal dynamics in type-I ELMy H-mode discharges is significantly affected by a change in the recycling conditions at the tungsten plasma-facing components (W-PFCs) after an ELM event. The integrated code JINTRAC has been employed to assess the impact of recycling conditions during type-I ELMs in JET ITER-l…

Published
2016
CCFE-PR(16)24

Rotating collectors and quartz microbalances (QMBs) are used in JET to provide time-dependent measurements of erosion and deposition. Rotation of collector discs behind apertures allows recording of the long term evolution of deposition. QMBs measure mass change via the frequency deviations of vibrating quartz crystals. These diagnostics are used t…

Preprint Published
2016
CCFE-PR(16)22

An overview is given on the recent progress on edge modelling activities for the JET ITER like wall using the computational tools like the SOLPS or EDGE2D-EIRENE code. The validation process of these codes on JET with its metallic plasma-facing components is an important step towards predictive studies for ITER and DEMO in relevant divertor operati…

Preprint Published
2015
CCFE-PR(15)111

Recent studies dedicated to the characterisation of in-vessel dust in JET with the new ITER-like wall (ILW) show that dust levels are orders of magnitude lower compared with the latter stages of the carbon-wall (CW) period and are decreasing with operational time. Less than 1 g of dust was recovered in a recent inspection, compared with more than 2…

Preprint Published
2015
CCFE-PR(17)36

Disruptions, the fast accidental losses of plasma current and stored energy in tokamaks, represent asignificant risk to the mechanical structure as well as the plasma facing components of reactor-scale fusion facilities like ITER. At JET, the tokamak experiment closest to ITER in terms of operating parameters and size, massive gas injection has bee…

Preprint Published