Journals

Showing 1 - 10 of 36 Journals Results
2020
UKAEA-CCFE-PR(20)132

Mechanical constitutive models of metals undergoing deformation in three dimensions can be challenging to validate without loss of generality. For example, creep-induced stress relaxation in stainless steels has previously been studied using axisymmetric notched-bar tests which control the triaxiality of the initial stress state. However, such expe…

Preprint
2020
UKAEA-CCFE-PR(20)126

Martensitic stainless steels have been widely used in industries due to their high strength and good corrosion resistance performance. Precipitation-hardened (PH) martensitic stainless steels are featured by their very high strength compared with other stainless steels, around 3-4 times of the strength of austenitic stainless steels such as 304 and…

Preprint Published
2020
UKAEA-CCFE-PR(20)121

Effects of parallel and poloidal flows, as well as the flow shear, on the resistive wall mode (RWM) instability have been numerically investigated in toroidally rotating plasmas, utilizing a recently updated version of the MARS-F code (Liu Y Q et al 2000 Phys. Plasmas 7 3681). A significant difference between these flows i…

Preprint Published
2020
UKAEA-CCFE-PR(20)120

A Doppler coherence imaging spectroscopy diagnostic has been developed on the HL- 2A tokamak for scrape-off-layer impurity plasma flow measurements. Two- dimensional imaging of line-averaged C2+ flow in the high-field-…

Preprint Published
2020
UKAEA-CCFE-PR(20)119

Supramolecular chemistry offers an exciting opportunity to assemble materials with molecular precision. However, there remains an unmet need to turn molecular self-assembly into functional materials and devices. Harnessing the inherent properties of both disordered proteins and graphene oxide (GO), we report a disordered protein-GO co-assembling sy…

Preprint Published
2020
UKAEA-CCFE-PR(20)112

A technology readiness assessment has been carried out on materials under development within the EUROfusion materials work package (WPMAT). This covers materials for structural, high heat flux and functional applications (breeder materials and coatings are not covered). The baseline materials have been assigned Material Technology Readiness Levels …

Preprint
2020
UKAEA-CCFE-PR(20)70

Determining tensile properties from small punch test is being pursued actively in the nuclear industry due to the limited volume of material such tests use compared with standard tests which can be critical when considering active or development samples. One of the crucial challenges in harnessing the full potential of this technique is formulating…

Preprint Published
The published version of this paper is currently under embargo and will be available on 01/06/2022
2020
UKAEA-CCFE-PR(20)14

Crystal plasticity finite element (CPFE) modelling is an effective tool from which detailed information on the meso-scale behaviour of crystalline metallic systems can be extracted and used, not only to enhance the understanding of material behaviour under different loading conditions, but also to improve the structur…

Preprint Purchase
The published version of this paper is currently under embargo and will be available on 07/06/2022
2020
UKAEA-CCFE-PR(20)05

Resistive plasma response to the n = 1 (n is the toroidal mode number) RMP field is systematically investigated for a high-beta hybrid discharge on ASDEX Upgrade. Both linear and quasi-linear response are modelled using the MARS-F and MARS-Q codes, respectively. Linear response computations show a large internal kink response when the plasma centr…

Preprint Purchase
The published version of this paper is currently under embargo and will be available on 28/07/2021