-
UKAEA-CCFE-PR(24)2692024
The paper provides an assessment of the ion-cyclotron resonance heating (ICRH) system performance on JET since the year 2000. The vast amount of collected data offer an insight into the historical challenges and trends in the ICRH system performance encompassing the transition from carbon (JET-C) to beryllium (JET‑Be) first wall operations, th…
-
UKAEA-CCFE-PR(24)2322024
The JET-ILW pure Tritium and Deuterium-Tritium (DTE2) experimental campaigns took place in 2021-2022. Tritium (T) and Deuterium-Tritium (D-T) operations present challenges not encountered in present day tokamaks [1]. This contribution focuses on Ion Cyclotron Resonance Heating (ICRH) operations in tritium and deuterium-tritium plasmas, starting …
-
UKAEA-CCFE-PR(23)1822023
The reference ion cyclotron resonance frequency (ICRF) heating schemes for ITER deuterium-tritium (D-T) plasmas at the full magnetic field of 5.3 T are second harmonic heating of tritium and 3He minority heating. The wave-particle resonance location for these schemes coincide and are central at a wave frequency of 53 MHz at 5.3T [1]. Experiments ha…
-
UKAEA-CCFE-PR(23)1802023
-
2014
ITER’s Ion Cyclotron Range of Frequencies (ICRF) system [Lamalle et al., Fusion Eng. Des. 88, 517–520 (2013)] comprises two antenna launchers designed by CYCLE (a consortium of European associations listed in the author affiliations above) on behalf of ITER Organisation (IO), each inserted as a Port Plug (PP) into one of ITER’s Vacuum Vessel …
-
2014
ITER’s Ion Cyclotron Range of Frequencies (ICRF) system [1] comprises two antenna launchers designed by CYCLE (a consortium of European associations listed in the author affiliations above) on behalf F4E for the ITER Organisation (IO), each inserted as a Port Plug (PP) into one of ITER’s Vacuum Vessel (VV) ports. Each launcher is an array of 4 …
-
2013
In the ITER equatorial ports containing ICRH antennas, parasitic electrical resonances can be excited in the nominal 20 mm clearance gap between the port walls and the plug contained within it. RF calculations have established that these resonances can be effectively mitigated by a series of suitably located electrically conducting contacts between…
-
2011
The ITER ICRF antenna’s coupled power to plasma is determined not only by the plasma scrape-off layer profiles and shaping of the front strap array, but also by assuring optimal excitation of the array by the overall layout of the feed network and the detailed shaping of the RF components therein. This paper describes the optimization of the feed…
-
2011
-
2007
The design of the ITER ICRF system has been under revision for several years. The paper presents the status of the design proposal based on a 24 strap antenna plug (6 poloidal by 4 toroidal short radiating conductors) in which the straps are passively combined in 8 poloidal triplets by means of 4-port junctions. These triplets are connected in para…
Showing 1 - 10 of 10 UKAEA Paper Results
Page 1 of 1