-
UKAEA-STEP-PR(24)202024
Success of UKs STEP (Spherical Tokamak for Energy Production) programme [1] [2] [3] [4] requires a robust plasma control system. This system has to guide the plasma from initiation to the burning phase, maintain it there, producing the desired fusion power for the desired duration and then terminate the plasma safely. This has to be done in a ch…
-
UKAEA-CCFE-PR(23)1152023
This article starts with a brief description of two new viewing systems with a light path which crosses the biological shield wall and are compatible with Deuterium-Tritium (D-T) operations in JET. However, it focuses on the optical modelling and engineering design of one of them which is a multiple camera system producing a wide angle view (WAV)…
-
UKAEA-CCFE-CP(23)042023
When RF waves are applied in tokamaks with metal walls, sheath rectification effects associated with the fields induced in the scrape-off layer (SOL) may lead to enhanced plasma-wall interactions (i.e. heat-loads in the limiters, RF-induced impurity sources) which can endanger the integrity of the machine and limit the RF power. Although many co…
-
UKAEA-CCFE-PR(23)092023
Following from the paper describing the remote wide angle viewing system compatible with Deuterium-Tritium operations. This is the second article describing a second remote line of sight, this time focusing on the imaging of the divertor region in JET. It explains in detail the optical and engineering designs of constructing an optical relay which …
-
UKAEA-CCFE-CP(21)032021
The field of fusion energy is about to enter the ITER era, for the first time we will have access to a device capable of producing 500 MW of fusion power, with plasmas lasting more than 300 seconds and with core tem- perature…
-
UKAEA-CCFE-CP(20)862018
Nuclear fusion is the process that heats the stars by the collision of atomic nuclei which fuse together to form heavier elements and release energy. The generation of energy using this process has several advantages: no carbon emissions, abundant fuel supplies, efficiency, reliability and operationally safe. One way to achieve the necessary con…
-
UKAEA-CCFE-CP(20)762018
In 1998 Makhankov [1] described the concept of modular exchangeable plasma facing components (PFCs) based on liquid metal heat pipes which are radiatively cooled. Here we present results from recent experiments with a lithium filled tubular heat pipe owned by Sandia National Laboratories. The tantalum envelope (~20mm diameter by ~200mm long) was he…
-
UKAEA-CCFE-PR(20)642018
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
-
UKAEA-CCFE-PR(19)692019
The equipment used in some welding techniques (e.g. tungsten inert gas alternating current welding or capacitor discharge stud welding) can induce high electromagnetic fields inside the operator due to the large time-varying electric currents involved in the process. The European Union (EU) Directive 2013/35/EU provides guidelines and recommendatio…
Showing 1 - 9 of 9 UKAEA Paper Results
Page 1 of 1