Showing 181 - 190 of 260 Conference Paper Results
1964
CLM P53
Presented at the 6th International Symposium on Ionization Phenomena in Gases, Paris , 1963
AC Riviere DR Sweetman
Preprint
1961
1963
2019
UKAEA-CCFE-CP(19)57
14th International Reflectometry Workshop, Swiss Plasma Center of the Ecole Polytechnique Fédérale de Lausanne, Switzerland, 22-24 May 2019
R. B. Morales S. Heuraux R. Sabot S. Hacquin
All density profile reconstruction techniques for both O-mode and X-mode are based on the assumption that the cut-off frequency profile is monotonic. However, there are many sources of perturbations to the plasma that generate hollow areas in the cut-off frequency profile, breaking the aforementioned assumption. This causes a significant immediate …
Preprint Published2020
UKAEA-CCFE-CP(20)01
149th Annual Meeting & Exhibition of the Minerals, Metals and Materials Society, San Diego, USA, 23 - 27 February 2020
Lee Aucott Rob Bamber Artem Lunev Tim Darby Philippe Maquet Nathalie Gimbert Sunil Pak Mike Walsh Victor Udintsev Glenn Eaton Brendan Conway
The United Kingdom Atomic Energy Authority are involved in the design and manufacture of the diagnostic windows for ITER. ITER is an international project, with 35 nations collaborating to design, construct and operate a prototype controlled nuclear fusion reactor in southern France. As well as providing line of sight for diagnostics, the window…
Preprint Published2019
UKAEA-CCFE-CP(19)55
14th International Reflectometry Workshop, Swiss Plasma Center of the Ecole Polytechnique Fédérale de Lausanne, Switzerland, 22-24 May 2019
V.H. Hall-Chen F.I. Parra J.C. Hillesheim
The use of Doppler Backscattering (DBS) in spherical tokamaks is challenging since the magnetic pitch angle can be large (up to 35, compared to 15 in standard tokamaks like JET). Moreover the pitch angle varies both spatially and temporally. Hence, the probe beam is generally not perpendicular to the magnetic field. This misalignment, which affec…
Preprint Published2019
UKAEA-CCFE-CP(19)54
28th IEEE Symposium on Fusion Engineering, Jacksonville, Florida, USA, 2 – 6 June 2019