M. Tindall T. Deighan S. Rosini N. Bowden S. Biggs-Fox T. Barrett
Critical to the successful design of fusion reactor components is the development of coupled simulation models, capable of conducting efficient whole system design optimisation and virtual component qualification, under conditions which cannot be readily tested. Additionally, successful lifetime monitoring and predictive maintenance of fusion compo…
Preprint PublishedElla Fox-Widdows Mark D. Bowden Kazuo Hoshino Akiyoshi Hatayama Ryoko Osawa Yuka Tsubotani
Collisional-radiative models are commonly used to analyse atomic and molecular processes in low temperature plasmas by determining the distribution functions of excited states as functions of various plasma parameters. This paper outlines the improvements to a zero-dimensional collisional-radiative model, developed at Keio University, for purposes …
PreprintD.J.M. King A.J. Knowles D. Bowden M.R. Wenman S. Capp M. Gorley J. Shimwell L. Packer M.R. Gilbert A. Harte
This Review considers current Zr alloys and opportunities for advanced zirconium alloys to meet the demands of a structural material in fusion reactors. Zr based materials in the breeder blanket offer the potential to increase the tritium breeding ratio above that of Fe, Si and V based materials. Current commercial Zr alloys might be considered …
Preprint PublishedN. Mantel D. Bowden S.S. Herashchenko M. Fursdon A. D. L. Hancock I.E. Garkusha J. Roberts V.A. Makhlai A. von Mueller T. R. Barrett J.-H. You
In the conceptual design of EU-DEMO, damage to plasma facing components under disruption events is planned to be mitigated by specific sacrificial limiter components. A new limiter concept has been proposed using lattice structures fabricated with tungsten powder by additive manufacturing techniques. The major potential benefits of using a latti…
Preprint PublishedSamuel Rogers David Bowden Rahul Unnikrishnan Fabio Scenini Michael Preuss David Stewart Daniele Dini David Dye
The galling behaviour of 316L stainless steel was investigated in both the unoxidised and oxidised states, after exposure in simulated PWR water for 850 hours. Galling testing was performed according to ASTM G196 in ambient conditions. 316L was found to gall by the wedge growth and flow mechanism in both conditions. This resulted in folds ahead of …
Preprint Published