-
2012
The VUV/XUV spectral region is particularly rich in lines emitted by plasmas with temperatures = 30 keV used in fusion research. Examples are presented of analyses of JET tokamak data involving C VUV/XUV radiation. In the first, the C IV divertor emission is modelled, with agreement between theory and experiment to within the measurement accuracy o…
-
2012
The neutron field parameters (fluence and energy distribution) at a specific location outside the JET Torus Hall have been measured by means of super-heated fluid detectors (or “bubble detectors”) in combination with an independent, time-of-flight, technique. The bubble detector assemblies were placed at the end of a vertical line of sight at a…
-
2012
For the new ITER-like wall at JET, two new infrared diagnostics (KL9B, KL3B) have been installed. These diagnostics can operate between 3.5 and 5 µ m and up to sampling frequencies of ~ 20 kHz. KL9B and KL3B image the horizontal and vertical tiles of the divertor. The divertor tiles are tungsten coated carbon fiber composite except the central til…
-
2012
In preparation for ITER, JET has been upgraded with a new ITER-like wall (ILW), whereby the main plasma facing components, previously of carbon, have been replaced by mainly Be in the main chamber and W in the divertor. As part of the many diagnostic enhancements, a new, survey, visible spectroscopy diagnostic has been installed for the characteriz…
-
2012
A new endoscope with optimised divertor view has been developed in order to survey and monitor the emission of specific impurities such as tungsten and the remaining carbon as well as beryllium in the tungsten divertor of JET after the implementation of the ITER-like wall in 2011. The endoscope is a prototype for testing an ITER relevant design con…
-
2012
An in-vessel calibration light source (ICLS) has been implemented for remote use during extended shutdown periods of the Joint European Torus (JET). The ICLS facilitated the in situ calibration of optical diagnostics, which previously were performed when the diagnostics were removed from JET. Since the ICLS is used to calibrate diagnostics over the…
-
2012
-
2012
-
2011
The constructive interference effect described by Fuchs et al. [1] shows that the mode conversion and thereby the overall heating efficiency can be enhanced significantly when an integer number of fast wave wavelengths can be folded in between the high field side fast wave cutoff and the ion-ion hybrid layer(s) at which the ion Bernstein or ion cyc…
-
2011
Showing 391 - 400 of 510 UKAEA Paper Results