-
UKAEA-CCFE-PR(23)1912023
ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs is contributing to the preparation of ITER scientific exploitation and operation and aspires to exploit ITER outcomes in view of DEMO. The paper provides …
-
UKAEA-CCFE-PR(23)1812023
During the DTE2 campaign in the JET tokamak we performed a parameter scan in T and D-T complementing existing pulses in H and D. For the different main ion masses H-modes at fixed plasma current and magnetic field can have the pedestal pressure varying by a factor of 4 and the total pressure changing from betaN = 1.0 to 3.0. Based on this wide data…
-
UKAEA-CCFE-PR(23)1802023
-
UKAEA-CCFE-PR(23)1442023
A dataset of baseline DT plasmas with peripheral HFS fuelling pellets has been produced on JET, in order to mimic the situtation in ITER. During the pellet ablation phase prompt particle losses due to pellet triggered ELM can be detected. Regarding pellet deposition, the data indicate that plasmoids drift velocity might be smaller than predicted…
-
UKAEA-CCFE-PR(22)872022
The neutral ionisation model proposed by R J Groebner et al. (Phys Plasmas 9 2134 (2002)) to determine the plasma density profile in the H-mode pedestal, extended to include charge exchange processes in the pedestal stimulated by the ideas of Mahdavi et al. ((Phys Plasmas 10 3984 (2003)). The model is then teste…
-
UKAEA-CCFE-PR(22)482022
The evolution of SOL density profiles and fluctuations have been studied at different recycling levels in 3 different tokamaks, ASDEXUpgrade, TCV and JET, all operated in HMode. In all devices we clearly observe an increase of far SOL efolding length at high …
-
UKAEA-CCFE-CP(22)032022
-
UKAEA-CCFE-PR(22)092022
Experiments in ASDEX Upgrade (AUG) and JET with the ITER-like wall (JET-ILW) are performed to separate the pedestal and core contributions to confinement in H-modes with different main ion masses. A strong isotope mass dependence in the pedestal is found which is enhanced at high gas puffing. This is because the ELM type changes when going fro…
-
UKAEA-CCFE-PR(22)052022
The analysis of quiescent discharges exhibiting edge harmonic magnetoydrodynamic activity in the JET-Carbon wall machine is presented. It is observed that the quiescent phase with multiple-n harmonic oscillations is sustained until a threshold in pedestal electron density and collisionality is crossed. The macroscopic pedestal parameters associated…
-
UKAEA-CCFE-CP(23)612021
The relative role of particle transport and edge fuelling in setting the H-mode density pedestal is still a key open question [1]. Although reduced pedestal models have proven successful in predicting the pedestal pressure for a wide range of plasma scenarios [2,3,4], they lack a first principle based, predictive model for the edge density. Pred…
Showing 1 - 10 of 32 UKAEA Paper Results