-
2013
CCFE perform Monte-Carlo transport simulations on large and complex tokamak models such as ITER. Such simulations are challenging since streaming and deep penetration effects are equally important. In order to make such simulations tractable, both variance reduction (VR) techniques and parallel computing are used. It has been found that the applica…
-
2013
One of the strong motivations for pursuing the development of fusion energy is its potentially low environmental impact and very good safety performance. But this safety and environmental potential can only be fully realized by careful design choices. For DEMO and other fusion facilities that will require nuclear licensing, S&E objectives and crite…
-
2013
The In-Vessel Viewing System (IVVS) in ITER consists of six identical units which are deployed between pulses or during shutdown, to perform visual examination and metrology of plasma facing components. The system is housed in dedicated ports at B1 level, with deployment at the level between the divertor cassettes and the lowermost outboard blanket…
-
2012
The neutron field parameters (fluence and energy distribution) at a specific location outside the JET Torus Hall have been measured by means of super-heated fluid detectors (or “bubble detectors”) in combination with an independent, time-of-flight, technique. The bubble detector assemblies were placed at the end of a vertical line of sight at a…
-
2012
-
2012
The scope, methodology, and preliminary results are presented of a series of neutron transport and activation analyses aimed at updating the ITER radioactive inventory assessment and assisting the waste management planning. Calculations are performed using stateof-the-art three-dimensional models, codes, and data libraries and thereby overcoming ea…
-
2011
The electron Bernstein wave (EBW) is typically the only wave in the electron cyclotron (EC) range that can be applied in spherical tokamaks for heating and current drive (H&CD). Spherical tokamaks (STs), which feature relatively high neutron flux and good economy, operate generally in high-ß regimes, in which the usual EC O- and X- modes are cut-o…
-
2011
It is well known that stabilization of the resistive wall mode (RWM) may allow fusion power to be significantly increased for a given magnetic field in advanced tokamak operation. The principle of stabilization of the RWM by rotation has been established both experimentally and theoretically. Recent experimental results have indicated stabilization…
-
2011
Stabilization of the resitive wall mode (RWM) may allow fusion power to be doubled for a given magnetic field in advanced tokamak operation. Experimental evidence from DIII-D and other machines suggests that plasma rotation can stabilize the RWM. Several authors (Finn 1995 Phys. Plasmas 2 3782, Bondeson Xie 1997 Phys. Plasmas 4 2081) have construct…
-
2011
It is known that a priori information on the distribution of neutron fluxes over neutron transport models can improve the computational efficiency of Monte Carlo transport calculations via the use of variance reduction techniques. The uncertainty lies in finding a method which obtains this information as fast and effortlessly as possible. A number …
Showing 71 - 80 of 123 UKAEA Paper Results