A.Kirk I.T. Chapman Yueqiang Liu P. Cahyna P. Denner G. Fishpool C.J. Ham J.R. Harrison Yunfeng Liang E. Nardon S. Saarelma R. Scannell A.J. Thornton The Mast Team
Sustained ELM mitigation has been achieved using RMPs with a toroidal mode number of n=4 and n=6 in lower single null and with n=3 in connected double null plasmas on MAST. The ELM frequency increases by up to a factor of eight with a similar reduction in ELM energy loss. A threshold current for ELM mitigation is observed above which the ELM freque…
PublishedIT Chapman JP Graves O Sauter C Zucca O Asunta RJ Buttery S Coda T Goodman V Igochine T Johnson M Jucker RJ La Haye M Lennholm JET-EFDA Contributors
13MW of electron cyclotron current drive (ECCD) power deposited inside the q = 1 surface is likely to reduce the sawtooth period in ITER baseline scenario below the level empirically predicted to trigger neo-classical tearing modes (NTMs). However, since the ECCD control scheme is solely predicated upon changing the local magnetic shear, it is prud…
PublishedA.J. Thornton A. Kirk I.T. Chapman J.R. Harrison The Mast Team
Edge localised modes (ELMs) are a concern for future devices as they can limit the operational lifetime of the divertor. The mitigation of ELMs can be performed by the application of resonant magnetic perturbations (RMPs) which act to degrade the pressure gradient in the edge of the plasma. Investigations of the effect of RMPs on MAST have been per…
PublishedI. T. Chapman A. Kirk C. J. Ham J. R. Harrison Y. Q. Liu et al.
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4, and 6 resonant magnetic perturbations. For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increa…
PublishedA. Kirk I.T. Chapman J. Harrison Yueqiang Liu E. Nardon S. Saarelma R. Scannell A.J. Thornton The Mast Team
The application of resonant magnetic perturbations (RMPs) with a toroidal mode number of n=4 or n=6 to lower single null plasmas in the MAST tokamak produces up to a factor of 5 increase in Edge Localized Mode (ELM) frequency and reduction in plasma energy loss associated with type-I ELMs. A threshold current for ELM mitigation is observed above wh…
PublishedI.T. Chapman R.J. La Haye R.J. Buttery W.W. Heidbrink G.L. Jackson C.M. Muscatello C.C. Petty R.I. Pinsker B.J. Tobias F. Turco
Sawtooth control using electron cyclotron current drive (ECCD) has been demonstrated in ITER-like plasmas with a large fast ion fraction, wide q = 1 radius and long uncontrolled sawtooth period in DIII-D. The sawtooth period is minimized when the ECCD resonance is just inside the q = 1 surface. Sawtooth destabilization using driven current inside q…
PublishedI.T. Chapman A. Kirk S. Saarelma J.R. Harrison R. Scannell The Mast Team
The application of resonant magnetic perturbations with toroidal mode number n = 4 or n = 6 is observed to result in a significant increase in ELM frequency, despite a reduction in the edge pressure gradient. A picture for how type-I ELMs are mitigated, or destabilised, when magnetic perturbations are applied is proposed. Despite the magnetic pertu…
PublishedI.T. Chapman W.A. Cooper A. Kirk C.J. Ham J.R. Harrison A. Patel S.D. Pinches R. Scannell A.J. Thornton The Mast Team
The distortion of the plasma boundary when three-dimensional resonant magnetic perturbations are applied has been measured in MAST H-mode plasmas. When the n = 3 resonant magnetic perturbations are applied to control edge localised modes, the plasma experiences a strong toroidal corrugation. The displacement of the plasma boundary is measured at va…
PublishedS. Saarelma T. Casper I.T. Chapman G.T.A. Huijsmans O. Kwon J. Lee A. Loarte
A stability analysis using equilibria from CORSICA transport simulations finds that the maximum stable pedestal pressure in ITER 15 MA baseline plasma is 110 kPa corresponding to a pedestal temperature of 5.9 keV. The height of the stable pedestal is robust for the assumption of the pedestal height varying only by about 10% if the width of the pede…
Published