Nousheen Nawal Hanni Lux Member IEEE Rhian Chapman James R. Cowan Member APM
Being a novel technology, estimating costs for fusion power plants comes with large uncertainties. Cost uncertainties in prototypes arise from various sources and reduce with programme maturity (including the selection of a site), technical and design maturity, maturity of the commercial strategy (e.g., make vs. buy decisions, partnering de…
PreprintF.Eriksson E.Tholerus G.Corrigan Y.Baranov X.Bonnin D.Farina L.Figini L.Garzotti S.H.Kim F.Koechl A.Loarte E.Militello Asp C.Olde V.Parail S.D.Pinches A.Polevoi P.Strand
To design a safe termination scenario for a burning ITER plasma is a challenge that requires extensive core plasma and divertor modelling. The presented work consists of coupled core/edge/SOL/divertor simulations, performed with the JINTRAC code, studying the Q=10 flat-top phase and exit phase of the ITER 15MA/5.3T DT scenario. The modelling uti…
PreprintK. K. KIROV F. AURIEMMA P. J. BONOFIGLO C. D. CHALLIS E. DE LA LUNA J. ERIKSSON D. GALLART J. GARCIA M. GORELENKOVA J. HOBIRK P. JACQUET A. KAPPATOU Y. KAZAKOV D. KEELING D. KING V. KIPTILY E. LERCHE C. MAGGI J. MAILLOUX M. MASLOV M. MANTSINEN P. MANTICA S. MENMUIR R. SHARMA P. SIREN Z. STANCAR D. VAN EESTER JET CONTRIBUTORS
This work studies the influence of RF waves in ICRH range of frequency on fusion alphas during recent JET D-T campaign. Fusion alphas from D-T reactions are born with energies of about 3.5MeV and therefore have significant Doppler shift enabling synergistic interaction between them and RF waves at broad range of frequencies including the ones fo…
PreprintYao Ren Robert Skilton
Piping systems that transport coolant and breeding fluid are naturally an essential part of the support system of the nuclear fusion power plants. Following a campaign of operations, the reactor is required to be shut down and maintained entirely. Pipes connected to the reactor components are to be cut, re-welded or re-joined, and inspected non-des…
PreprintDavid Hancock David Homfray Michael Porton Iain Todd Brad Wynne Rob Bamber Kieran Flinders Paul Jepson Heather Lewtas Harry Robinson
The development of improved designs for components which will be subject to high heat fluxes has been identified as a critical challenge for the realisation of commercial fusion power. This paper presents details of a facility which allows early verification of thermofluid and thermomechananical performance of prototype components and enables compa…
PreprintM. Mantsinen P. Jacquet E. Lerche D. Gallart K. Kirov P. Mantica D. Taylor D. Van Eester M. Baruzzo I. Carvalho C. Challis E. Delabie E. De La Luna R. Dumont P. Dumortier J. Eriksson D. Frigione J. Garcia L. Garzotti C. Giroud R. Henriques J. Hobirk A. Kappatou Y. Kazakov D. Keeling D. King V. Kiptily M. Lenholm P. Lomas C. Lowry C. Maggi J. Mailloux M. Maslov S. Menmuir I. Monakhov R.B. Morales C. Noble M. Nocente A. Patel G. Pucella C. Reux D. Rigamonti F. Rimini A. Sheikh S. Silburn P. Siren E. Solano Z. Stancar M. Tardochi
The reference ion cyclotron resonance frequency (ICRF) heating schemes for ITER deuterium-tritium (D-T) plasmas at the full magnetic field of 5.3 T are second harmonic heating of tritium and 3He minority heating. The wave-particle resonance location for these schemes coincide and are central at a wave frequency of 53 MHz at 5.3T [1]. Experiments ha…
PublishedL. Horvath M. Maslov P.A. Schneider C.F. Maggi L.Frassinetti B. Lomanowski R.B. Morales D. Nina S. Saarelma J. Simpson G. Corrigan D.I. Refy M.Brix T. Pereira M. Vecsei JET Contributors
The relative role of particle transport and edge fuelling in setting the H-mode density pedestal is still a key open question [1]. Although reduced pedestal models have proven successful in predicting the pedestal pressure for a wide range of plasma scenarios [2,3,4], they lack a first principle based, predictive model for the edge density. Predict…
Preprint PublishedL. Reali M.R. Gilbert M. Boleininger S.L. Dudarev
Neutrons interacting with atomic nuclei in most of the materials included in the current fusion reactor designs—notably tungsten, ferritic and stainless steels, copper alloys—generate a γ-photon flux that is comparable in magnitude and e…
Preprint Published