-
UKAEA-CCFE-PR(26)4322026
Pyvale is an open-source software package that aims to become an all-in-one tool for sensor simulation, sensor uncertainty quantification, sensor placement optimization, and calibration/validation. Central to this is support for image-based sensors, with a dedicated Digital Image Correlation (DIC) module designed for both standalone use and integra…
-
2026
Qualification of components operating in future fusion power plants will be heavily reliant on simulations of component behaviour. The lack of representative test environments for many aspects of the expected operating environment will necessitate full or partial virtual qualification of components. The cornerstone of virtual qualification is …
-
UKAEA-CCFE-PR(25)3092025
Neutral Beam Injection (NBI) is a powerful and very commonly used tool on machines used in the development of magnetically confined fusion power. Not all the neutral beam power is deposited within the plasma. This shinethrough power must be dealt with in the plasma vessel and any components irradiated by it must be protected against excessive he…
-
UKAEA-CCFE-PR(25)3012025
Detailed results are presented from the first experimental study of self-regulation between plasma relative density fluctuations and perpendicular velocity over limit cycle oscillations (LCO) across the edge and near scrape-off layer (SOL) regions of the MAST-U spherical tokamak. The start of the dithering phase is preceded by the localisation of t…
-
UKAEA-CCFE-PR(25)3262024
In this paper,we examine the role of the aspect ratio on the neutral penetration and poloidal distribution for fixed magnetic geometry and plasma profiles using SOLPS-ITER. We start from an H-mode discharge from MAST [9], with its aspect ratio of 1.4 and shift the magnetic equilibrium and vessel in major radius to generate a new SOLPS-ITER simul…
-
UKAEA-STEP-PR(24)212024
The design, delivery, and operation of a large-scale infrastructure project is challenging at best. For the Spherical Tokamak for Energy Production (STEP) Prototype Powerplant (SPP), the challenges increase exponentially. In addition to being a large-scale infrastructure project, it is a cutting edge, first of a kind (FOAK) technology demonstrat…
-
UKAEA-CCFE-PR(24)012024
Constitutive behaviour of fusion-relevant steels in the post-necking regime is necessary for detailed design of future fusion device components. A Finite Element Model Updating (FEMU) procedure using Digital Image Correlation (DIC), a simulated DIC filter and novel constitutive law was developed. The effects of the DIC process and experimental nois…
-
UKAEA-CCFE-CP(26)422023
Spherical tokamaks show great potential in being the basis for a compact fusion power plant. With a reduced aspect ratio and the benefit of increased plasma performance, spherical tokamaks provide a pathway for tokamak electricity production with reduced capital costs compared to conventional aspect ratio tokamak power plant designs. The…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-PR(23)1832023
The development of improved designs for components which will be subject to high heat fluxes has been identified as a critical challenge for the realisation of commercial fusion power. This paper presents details of a facility which allows early verification of thermofluid and thermomechananical performance of prototype components and enables compa…
Showing 1 - 10 of 73 UKAEA Paper Results