-
2014
ITER’s Ion Cyclotron Range of Frequencies (ICRF) system [Lamalle et al., Fusion Eng. Des. 88, 517–520 (2013)] comprises two antenna launchers designed by CYCLE (a consortium of European associations listed in the author affiliations above) on behalf of ITER Organisation (IO), each inserted as a Port Plug (PP) into one of ITER’s Vacuum Vessel …
-
2014
ITER’s Ion Cyclotron Range of Frequencies (ICRF) system [1] comprises two antenna launchers designed by CYCLE (a consortium of European associations listed in the author affiliations above) on behalf F4E for the ITER Organisation (IO), each inserted as a Port Plug (PP) into one of ITER’s Vacuum Vessel (VV) ports. Each launcher is an array of 4 …
-
2011
-
2009
Using the JET A2 ICRF antennas [1], experiments were carried out to assess the performance of three different dipole phasing configurations relevant for the operation of the ICRF antenna in ITER. Three similar discharges with dipole, "symmetric dipole" and "super dipole" phasings were compared. In the "super dipole" case, higher coupling was confir…
-
2007
The design of the ITER ICRF system has been under revision for several years. The paper presents the status of the design proposal based on a 24 strap antenna plug (6 poloidal by 4 toroidal short radiating conductors) in which the straps are passively combined in 8 poloidal triplets by means of 4-port junctions. These triplets are connected in para…
Showing 1 - 5 of 5 UKAEA Paper Results
Page 1 of 1