C.A. Middleton K. Amjad R.J. Greene E. Hack L. Harris A. Kupferschmid P.R. Lambert E.A. Patterson
A small, novel, integrated SHM system has been deployed during full-scale testing of a wing fatigue test and a fuselage pressurisation test. Complementary NDE measurement techniques were combined, with inputs from visible and infrared optical sensors, as well as resistance strain gauges. Sensor unitswere deployed at regions of interest and int…
PreprintRenato Pero Nicholas Randall Damian Frey Remo Widmer Tim Darby Lee Aucott Chris Hardie Sunil Pak Philippe Maquet Andrew Bushby
The International Thermonuclear Experimental Reactor (ITER) is an international nuclear fusion research and engineering project with the aim to prove the feasibility of nuclear fusion as a large-scale carbon-free source of energy. The reactor vessel contains several diagnostic windows that provide a line of sight to the plasma. Design and qualif…
PreprintJ. Öijerholm C. Harrington P. Gillen A. Harte L. Volpe J-H. You
In-vessel plasma facing components in fusion reactors such as ITER and DEMO experience high thermal loads and require active cooling, for which water is one possible coolant. The solution where plasma facing components utilise tungsten blocks as sacrificial armour has a joint internal structure of cooling tubes made from the copper base (~99% Cu…
Preprint PublishedWei Wang Daniel S Balint Amir A Shirzadi Yaping Wang Junyi Lee Lee Aucott Jun Jiang
Understanding the effects of interfacial micro-structures/-defects such as voids, grain boundaries (GB) and partial recrystallization (Rx) is critical to achieving superior mechanical properties for safety-critical parts. These features may appear during advanced manufacturing processes such as sintering, additive manufacturing (AM), and diffusi…
Preprint PublishedT. R. Barrett M. Bamford B. Chuilon T. Deighan T. Grant D. Horsley D. Johnstone M. Kovari M. Tindall
The CHIMERA fusion technology test facility is currently under construction at the UK Atomic Energy Authority site in South Yorkshire, UK. With the completion of the engineering design, including the design of a component mock-up to be used in full system commissioning, this paper presents in detail the features and capabilities of the CHIMERA faci…
Preprint PublishedK. Amjad W.J.R. Christian K. Dvurecenska D. Mollenhauer C.P. Przybyla E. A. Patterson
Wide-spread availability of low-cost digital sensors has made the acquisition of full-field experimental measurements less challenging, with modern measurement systems capable of obtaining three dimensional (3D) data fields. This presents difficulties when comparing computational and co…
Preprint PublishedM. Tindall T. Deighan S. Rosini N. Bowden S. Biggs-Fox T. Barrett
Critical to the successful design of fusion reactor components is the development of coupled simulation models, capable of conducting efficient whole system design optimisation and virtual component qualification, under conditions which cannot be readily tested. Additionally, successful lifetime monitoring and predictive maintenance of fusion compo…
Preprint PublishedS. Omole A. J. G. Lunt S. Kirk A. Shokrania
The high ductile-to-brittle transition temperature (DBTT) of tungsten combined with its high hardness make machining incredibly difficult. These properties typically result in the poor-quality machined surfaces and short tool life. In this study, TiAlN coated carbide tools with different rake angles (8°, 10° and 12°) were tested in convention…
PreprintRuth Sanderson Allan Sanderson Kwame Akowua
The feasibility of a new approach for pipe inspection has been explored using digital twins to enhance guided wave inspection. Guided wave inspection is well-established in the oil and gas industry to screen remotely long lengths of predominately straight pipeline for corrosion. However, inspection of complex geometries of pipe remains a challen…
Preprint PurchaseTriestino Minniti Heather Lewtas
The ability to detect undesired volumetric defects in reactor components could affect the safety and reliability of a fusion power plant and change the expected lifetime and performance of the reactor. This is even more true for critical reactor parts like plasma-facing components which have to withstand challenging in-vessel conditions due to a co…
Preprint Published- 1
- 2