-
UKAEA-CCFE-PR(21)032021
The resistive wall mode (RWM) control on the HL-2M tokamak is simulated with the MARS-F code [Liu Y Q et al 2000 Phys. Plasmas 7 3681], aiming at quantifying control current and voltage requirements when more realistic issues are taken into account, i.e. the control power saturation and the sensor signal noise. The fluid model predicts a narrow st…
-
UKAEA-CCFE-PR(21)022021
In quiescent H-mode (QH-mode) regime, edge harmonic oscillations (EHOs) are believed to provide necessary radial transport to prevent occurrence of large edge localized modes. A systematic modeling study is performed here on the low-n EHOs in a DIII-D QH-mode plasma [Chen et al. 2016 Nucl. Fusion 56 076011], by utilizing the MARS-Q code [Liu et a…
-
UKAEA-CCFE-PR(20)1212019
Effects of parallel and poloidal flows, as well as the flow shear, on the resistive wall mode (RWM) instability have been numerically investigated in toroidally rotating plasmas, utilizing a recently updated version of the MARS-F code (Liu Y Q et al 2000 Phys. Plasmas 7 3681). A significant difference between these flow…
-
UKAEA-CCFE-PR(19)772019
Internal flow behaviour during melt-pool-based metal manufacturing remains unclear and hinders progression to process optimisation. In this contribution, we present direct time-resolved imaging of melt pool flow dynamics from a high-energy synchrotron radiation experiment. We track internal flow streams during arc welding of steel and measure insta…
-
UKAEA-CCFE-PR(18)612018
Effects of toroidal plasma flow, magnetic drift kinetic damping as well as feedback control, on the resistive wall mode instability in HL-2M tokamak are numerically investigated, using the linear stability codes MARS-F/K (Liu Y Q et al 2000 Phys. Plasmas 7 3681, Liu Y Q et al 2008 Phys. Plasmas 15…
-
2013
Pure Fe and model Fe-Cr alloys containing 5, 10 and 14%Cr were irradiated with Fe+ ions at a maximum energy of 2MeV to the same dose of 0.6dpa at temperatures of 300°C, 400°C and 500°C, and at dose rates corresponding to 6 x 10-4 dpa/s and 3 x 10-5 dpa/s. All materials exhibited an increase in hardness after irradiation at 300°C. After irradiat…
Showing 1 - 6 of 6 UKAEA Paper Results
Page 1 of 1