-
UKAEA-CCFE-CP(19)112018
Ion cyclotron emission (ICE) is a commonly observed feature of magnetized toroidal plasmas in the presence of fast ions. It is generally agreed that this emission is caused by a strongly inverted (in the velocity space) population of confined fast ions originating from either neutral beam injection (NBI), fusion reactions, or acceleration by waves …
-
UKAEA-CCFE-PR(18)762018
Fusion power could be one of very few sustainable options to replace fossil fuels as the world’s primary energy source. Fusion offers the potential of predictable, safe power with no carbon emissions, and fuel sources lasting for millions of years. However, it is notoriously difficult to achieve in a controlled, steady-state fashion. The most pro…
-
UKAEA-CCFE-PR(18)632018
The current paper reports the work of the EUROfusion Material Database and Handbook group within the MAT-EDDI (Materials – Engineering Data and Design Integration) subproject of the EUROfusion consortium. A special emphasis is put on the building of the EUROfusion RAFM steel database accounting around 3000 raw materials data records. A dat…
-
UKAEA-CCFE-PR(18)722018
Formation and migration energies, elastic dipole and relaxation volume tensors of nano-defects are the parameters that determine the rates of evolution of microstructure under irradiation and the magnitude of macroscopic elastic stresses and strains resulting from the accumulation of defects in materials. To find accurate values of these parameters…
-
UKAEA-CCFE-PR(18)692018
The impact of the three-dimensional (3D) tokamak geometry from external magnetic perturbations (MPs) on the local edge stability has been examined in high confinement mode (H-mode) plasmas with edge localised modes (ELMs) in ASDEX Upgrade. The 3D geometry has been probed using rigidly rotating MP fields. The measured distortions of the plasma bound…
-
UKAEA-CCFE-PR(18)682018
Helium is widely used as a fuel or minority gas in laboratory fusion experiments, and will be present as ash in DT thermonuclear plasmas. It is therefore essential to have a good understanding of its atomic physics. To this end He II population modelling has been undertaken for the spectroscopic levels arising from shells with principal quantum…
-
UKAEA-CCFE-PR(18)612018
Effects of toroidal plasma flow, magnetic drift kinetic damping as well as feedback control, on the resistive wall mode instability in HL-2M tokamak are numerically investigated, using the linear stability codes MARS-F/K (Liu Y Q et al 2000 Phys. Plasmas 7 3681, Liu Y Q et al 2008 Phys. Plasmas 15…
-
UKAEA-CCFE-PR(18)522018
Partial detachment is the desired regime for the baseline burning plasma scenario in ITER and next-step devices, as it allows to disspate the majority of the energy carried by charged particles through the scrape-off-layer (SOL) and thus avoids localised heat flux deposition in the divertor region. The COMPASS tokamak is equipped with an open diver…
-
UKAEA-CCFE-PR(19)022018
Following the lead of [Nguyen Van Yen Nucl. Fus. 52 (2012) 013005 (11pp)], this article tackles the problem of tomographic inversion with one camera assuming a constant emissivity of light along the magnetic field lines. In this way, the 3D problem reduces to 2D by helical symmetry, allowing for the reconstruction of any poloidal plane in the …
-
UKAEA-CCFE-PR(18)462018
Some of the main plasma physics challenges associated with achieving the conditions for commercial fusion power in tokamaks are reviewed. The confinement quality is considered to be a key factor, having an impact on the size of the reactor and exhaust power that has to be managed. Plasma eruptions can cause excessive erosion if not mitigated, with …
Showing 171 - 180 of 530 UKAEA Paper Results