-
UKAEA-STEP-PR(25)242024
The UKAEA’s Spherical Tokamak for Energy Production (STEP) programme aims to demonstrate the ability of low aspect ratio tokamaks to generate net electricity from deuterium-tritium (DT) fusion. As STEP have selected REBCO coated conductor (CC) as the current carrier in most magnet systems, understanding how REBCO CC responds to the energetic p…
-
UKAEA-CCFE-PR(24)2142024
In order to test the capability of the full electromagnetic DYON to predict the plasma initiation feasibility of individual discharges and thus the operating space in the device, a dedicated experimental database was built in MAST-U by scanning the prefilled gas pressure $p_0$ and the induced loop voltage $V_{loop}$ (3 failed breakdown discharge…
-
UKAEA-STEP-PR(24)022024
Being a novel technology, estimating costs for fusion power plants comes with large uncertainties. Cost uncertainties in prototypes arise from various sources and reduce with programme maturity (including the selection of a site), technical and design maturity, maturity of the commercial strategy (e.g., make vs. buy decisions, partnering decisions)…
-
UKAEA-STEP-PR(25)322023
In future demonstration fusion power plants, plasma facing components will face high steady state and ultra-high transient heat loads from the plasma. Introducing low thermal conductivity features to the component can reduce the peak temperatures seen by the coolant pipe, but at the trade-off of a loss of steady-state performance. Producing low-con…
-
UKAEA-CCFE-CP(25)112023
Retention of tritium in structural materials of a fusion reactor is a concern for tritium accountancy, maintenance, and decommissioning. Plasma facing materials will be exposed to high temperatures, neutron damage and hydrogen isotopes. The damage caused by these conditions is a large area of exploration for fusion, with many questions still to…
-
UKAEA-STEP-PR(25)232023
The purpose of this work was to establish an approach to drive the development, at pace, of a commercially relevant Spherical Tokamak Concept. Building on the table of parameters and idealised geometry generated from the work of S. Muldrew et al [1], applying core principles, tools, and approaches. The generation and utilisation of a reflective …
-
UKAEA-CCFE-PR(24)2592023
Two-micron thick erbium oxide tritium barrier coatings have been prepared by aerosol injection chemical vapor deposition and subsequently irradiated with 33 MeV Au 6+ ions at fluences up to 2.1×10 15 Au/m 2 at 550 o C. Scanning electron microscopy, X-ray diffraction and transmission electron microscopy were used to investigate the coating surf…
-
UKAEA-STEP-CP(23)112023
The UKAEA’s Spherical Tokamak for Energy Production (STEP) program aims to demonstrate the ability of a low aspect ratio tokamak to generate net electricity from deuterium-tritium fusion. Specifically, its aim is to deliver a prototype fusion power plant, targeting 2040, and a path to the commercial viability of fusion, by engaging with and invig…
-
UKAEA-STEP-PR(23)132023
Developments in fusion energy technology and the aspiration to build and run commercial fusion energy power plants has seen the commencement of numerous publicly and privately funded projects in recent years. Megaprojects, like fusion power plants, by their very nature are inherently complex and risky, therefore providing a robust cost estimate in …
-
UKAEA-CCFE-PR(23)1562023
Heat sinks have manifold applications, from micro-electronics to nuclear fusion reactors. Their performance expectations will continue to increase in line with the power consumption and miniaturisation of technology. Additive manufacturing enables the creation of novel, compact heat sinks with greater surface-to-volume ratios and geometrical comple…
Showing 11 - 20 of 45 UKAEA Paper Results