-
UKAEA-CCFE-PR(25)3012025
Detailed results are presented from the first experimental study of self-regulation between plasma relative density fluctuations and perpendicular velocity over limit cycle oscillations (LCO) across the edge and near scrape-off layer (SOL) regions of the MAST-U spherical tokamak. The start of the dithering phase is preceded by the localisation of t…
-
UKAEA-CCFE-PR(25)3262024
In this paper,we examine the role of the aspect ratio on the neutral penetration and poloidal distribution for fixed magnetic geometry and plasma profiles using SOLPS-ITER. We start from an H-mode discharge from MAST [9], with its aspect ratio of 1.4 and shift the magnetic equilibrium and vessel in major radius to generate a new SOLPS-ITER simul…
-
UKAEA-STEP-PR(24)212024
The design, delivery, and operation of a large-scale infrastructure project is challenging at best. For the Spherical Tokamak for Energy Production (STEP) Prototype Powerplant (SPP), the challenges increase exponentially. In addition to being a large-scale infrastructure project, it is a cutting edge, first of a kind (FOAK) technology demonstrat…
-
UKAEA-CCFE-CP(26)422023
Spherical tokamaks show great potential in being the basis for a compact fusion power plant. With a reduced aspect ratio and the benefit of increased plasma performance, spherical tokamaks provide a pathway for tokamak electricity production with reduced capital costs compared to conventional aspect ratio tokamak power plant designs. The…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-CP(23)622023
The UK National Nuclear Laboratory (NNL) has been developing its capability in high‑temperature water corrosion over the past years in collaboration with the University of Bristol, UK. As part of this work, studies have been undertaken on nuclear fusion‑specific material Eurofer‑97, a reduced activation ferritic‑martensitic steel. Eurofe…
-
UKAEA-CCFE-PR(18)262018
Pre-conceptual design studies for a European Demonstration Fusion Power Plant (DEMO) have been in progress since 2014. At this stage, while a range of design options are being considered, it is essential that assessments are carried out of the safety and environmental impact of these options. This is not only to ensure that the DEMO plant is op…
-
UKAEA-CCFE-CP(19)452019
Spherical Tokamaks offer a number of potential advantages for a future fusion power plant. They have a high ratio of thermal to magnetic field pressure (beta) and strong flows, either of which could result in reduced turbulence. Fewer Toroidal Field (TF) coils and a different geometry offers the potential for new methods of remote maintenance …
-
UKAEA-CCFE-PR(19)202019
The paper presents an analysis of disruptions occurring during JET-ILW plasma operations covering the period from the start of ILW (ITER-like wall) operation up to completion of JET operation in 2016. The total number of disruptions was 1951 including 466 with deliberately induced disruptions. The average disruption rate of unintended disruptions i…
-
UKAEA-CCFE-PR(18)712018
One of the overarching goals of a DEMO-class device is to demonstrate tritium self-sufficiency in a fusion power plant for the first time. A future power reactor will necessarily require a start-up inventory of tritium, mT start, before commencing fully fledged D-T operations for electricity production. In Europe, it is also presently cons…
Showing 1 - 10 of 43 UKAEA Paper Results