-
UKAEA-CCFE-PR(22)112022
Solid titanium beryllide blocks will be used for neutron multiplication in the in the helium-cooled pebble bed (HCPB) blanket concept of EU DEMO. A combination of hot extrusion of Be-Ti powders and subsequent hot isostatic pressing (HIP) of the obtained Be-Ti composites has been proposed for manufacturing such blocks. This work is devoted to the st…
-
UKAEA-CCFE-PR(22)102022
The EUROfusion materials research program for DEMO in-vessel components aligns with the European Fusion Roadmap and comprises the characterization and qualification of the in-vessel baseline materials EUROFER97, CuCrZr and tungsten, advanced structural and high heat flux materials developed for risk mitigation, as well as optical and dielectric fun…
-
UKAEA-CCFE-PR(24)2392021
One of the main capabilities of Atom Probe Tomography (APT) is the ability to not only identify but characterise early stages of precipitation at scales that are not achievable by other techniques. The most popular method, based on the Density-Based Spatial Clustering of Applications with Noise (DBSCAN), is used extensively in many branches of r…
-
UKAEA-CCFE-PR(21)752021
Eurofer97 steel is a primary structural material for the plasma facing-components of future fusion reactors. Laser welding is a promising technique that can overcome the challenges of remote handling and maintenance. However, the interaction of the induced residual stress distribution with the heterogeneous microstructure may degrade the mechanical…
-
UKAEA-CCFE-PR(21)592021
The plasma-facing components of future fusion reactors, where the Eurofer97 is the primary structural material, will be assembled by laser-welding techniques. The heterogeneous residual stress induced by welding can interact with the microstructure, resulting in a degradation of mechanical properties and a reduction in joint lifetime. Here, a Xe
-
UKAEA-CCFE-PR(21)492021
Using a combination of simulated data and pyrite isotopic reference materials, we have refined a methodology to obtain quantitative δ34S measurements from atom probe tomography (APT) datasets. This study builds on previous attempts to characterize relative 34S/32S ratios in gold containing pyrite using APT. We have also improved our understand…
-
UKAEA-CCFE-PR(21)232021
The work reported in this paper has already been presented internally by placement student Jacob Young at a MAST Physics and Technology meeting on December 17 2020. Therefore it does not require a paper review presentation. Please also note that the paper is proposed for inclusion in a special issue of Plasma Research Express linked to the recent I…
-
UKAEA-CCFE-PR(20)882020
The efficient confinement of fast ions is crucial to the development of a fusion power plant. Sawtooth crashes are a manifestation of an internal kink instability, which can severely degrade this confinement. The effect of these on a fast ion population can be investigated using fast-ion deuterium-alpha (FIDA) spectroscopy, where charge exchange…
-
UKAEA-CCFE-PR(20)842020
Precipitation hardened Copper-Chromium-Zirconium (CuCrZr) alloy is a prime candidate for divertor components in future European DEMOnstration fusion reactors. To develop the DEMO Design Criteria for In-vessel Components (DDC-IC), the failure criterion of CuCrZr needs to be investigated. Hence, the effects of stress triaxiality and loading…
-
UKAEA-CCFE-PR(20)112019
The galling behaviour of 316L stainless steel was investigated in both the unoxidised and oxidised states, after exposure in simulated PWR water for 850 hours. Galling testing was performed according to ASTM G196 in ambient conditions. 316L was found to gall by the wedge growth and flow mechanism in both conditions. This resulted in folds ahead of …
Showing 21 - 30 of 60 UKAEA Paper Results