-
UKAEA-CCFE-CP(24)052022
A new Doppler backscattering (DBS) system has been installed and tested on the MAST-U spherical tokamak. It utilizes eight simultaneous fixed frequency probe beams (32.5, 35, 37.5, 40, 42.5, 45, 47.5, and 50 GHz). These frequencies provide a range of radial positions from the edge plasma to the core depending on plasma conditions. The system utiliz…
-
UKAEA-CCFE-CP(23)522022
An investigation was conducted into minimising effective dose to members of the public in the unlikely event of an accident by optimising design parameters and site locations of future fusion power plants. This is part of our defence in depth approach for tritium safety that also includes significant work on the prevention of accidents. Calculat…
-
UKAEA-CCFE-CP(23)512022
The EU DEMO power plant is the final stage of the EUROfusion Fusion Technology Programme’s route to commercially viable electricity supply [1]. The selection of apposite technologies for DEMO power plant sub-systems is essential. The breeding blanket, responsible for absorption of nuclear energy, tritium fuel production and a substantial proporti…
-
UKAEA-CCFE-CP(23)362022
To make informed decisions during the concept selection activities of a fusion power plant it is necessary to evaluate the impact of uncertainties on the feasibility and performance of each concept. A framework for uncertainty quantification and sensitivity analysis has been developed for the PROCESS systems code to allow the direct comparison o…
-
UKAEA-CCFE-PR(22)862022
Doppler reflectometry, or the Doppler backscattering (DBS) diagnostic, enables the measurement of turbulent density fluctuations of intermediate length scales, typically $10 gtrsim k_perp rho_i gtrsim 1$; here $k_perp$ is the turbulence’s wavenumber and $rho_i$ is the ion gyroradius. The backscattered power is proportional to the power of the tur…
-
UKAEA-CCFE-CP(22)102022
We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam’s electric field is not in the plane perpendicular to the magnetic field. Correcting …
-
UKAEA-CCFE-PR(22)502022
Fusion power plant designs based on magnetic confinement, such as the tokamak design, offer a promising route to sustainable fusion power but require robust exhaust solutions capable of tolerating intense heat and particle fluxes from the plasma to material surfaces. Turbulent plasma transport in the divertor volume – the region where the plasma-…
-
UKAEA-CCFE-PR(22)242022
The accurate and efficient mapping of the radiation environment in a nuclear fusion reactor requires the most advanced radiation transport tools. The Monte Carlo method has long been deployed to deal with the complexity of fusion relevant geometries, with MCNP the adopted industry standard code among the European and wider international communit…
-
UKAEA-CCFE-PR(22)212022
This paper describes the development of electromagnetic plasma burn-through model. Full circuit equations describing the currents in solenoid, poloidal field coil, and toroidally conducting passive structure have been integrated into the differential equation system of the plasma energy and particle balances in DYON. This enables consistent calcula…
-
UKAEA-CCFE-PR(24)2392021
One of the main capabilities of Atom Probe Tomography (APT) is the ability to not only identify but characterise early stages of precipitation at scales that are not achievable by other techniques. The most popular method, based on the Density-Based Spatial Clustering of Applications with Noise (DBSCAN), is used extensively in many branches of r…
Showing 31 - 40 of 85 UKAEA Paper Results