-
UKAEA-CCFE-CP(21)042021
The use of small specimen test techniques (SSTT) to determine mechanical properties of irradiated materials has been studied over the previous decades both in fission and fusion programs, but also to characterise and optimise new materials by nuclear and non-nuclear communities. Currently a number of activities are running that focus on the standar…
-
UKAEA-CCFE-PR(21)122021
Small punch creep (SPC) testing represents an effective way to rapidly assess the creep performance of novel materials and potentially monitor degradation of in-service components. Recent progress in standardisation has also led to improvements in data analysis. However, estimation of equivalent uniaxial stresses is still somewhat challenging and h…
-
UKAEA-CCFE-PR(21)032021
The resistive wall mode (RWM) control on the HL-2M tokamak is simulated with the MARS-F code [Liu Y Q et al 2000 Phys. Plasmas 7 3681], aiming at quantifying control current and voltage requirements when more realistic issues are taken into account, i.e. the control power saturation and the sensor signal noise. The fluid model predicts a narrow st…
-
UKAEA-CCFE-PR(21)022021
In quiescent H-mode (QH-mode) regime, edge harmonic oscillations (EHOs) are believed to provide necessary radial transport to prevent occurrence of large edge localized modes. A systematic modeling study is performed here on the low-n EHOs in a DIII-D QH-mode plasma [Chen et al. 2016 Nucl. Fusion 56 076011], by utilizing the MARS-Q code [Liu et a…
-
UKAEA-CCFE-PR(23)852020
Assessment of the limits of stability of tokamak plasmas is key to operation in high fusion performance ranges without disruption of the plasma current. Projected equilibria have been generated for the MAST-U spherical tokamak experiment, an upgrade of the previous MAST device, in order to prepare for operation. These equilibria are scanned in p…
-
UKAEA-CCFE-PR(20)1322020
Mechanical constitutive models of metals undergoing deformation in three dimensions can be challenging to validate without loss of generality. For example, creep-induced stress relaxation in stainless steels has previously been studied using axisymmetric notched-bar tests which control the triaxiality of the initial stress state. However, such expe…
-
UKAEA-CCFE-PR(20)1262020
Martensitic stainless steels have been widely used in industries due to their high strength and good corrosion resistance performance. Precipitation-hardened (PH) martensitic stainless steels are featured by their very high strength compared with other stainless steels, around 3-4 times of the strength of austenitic stainless steels such as 304 and…
-
UKAEA-CCFE-PR(20)1192020
Supramolecular chemistry offers an exciting opportunity to assemble materials with molecular precision. However, there remains an unmet need to turn molecular self-assembly into functional materials and devices. Harnessing the inherent properties of both disordered proteins and graphene oxide (GO), we report a disordered protein-GO co-assembling sy…
-
UKAEA-CCFE-PR(20)1122020
A technology readiness assessment has been carried out on materials under development within the EUROfusion materials work package (WPMAT). This covers materials for structural, high heat flux and functional applications (breeder materials and coatings are not covered). The baseline materials have been assigned Material Technology Readiness Levels …
-
UKAEA-CCFE-CP(20)1012020
Disruption prediction and avoidance is critical in ITER and reactor-scale tokamaks to maintain steady plasma operation and to avoid damage to device components. The present status and results from the physics-based disruption event characterization and forecasting (DECAF) research effort are shown for multiple tokamak devices. Present analysis of K…
Showing 31 - 40 of 72 UKAEA Paper Results