-
UKAEA-STEP-PR(24)202024
Success of UKs STEP (Spherical Tokamak for Energy Production) programme [1] [2] [3] [4] requires a robust plasma control system. This system has to guide the plasma from initiation to the burning phase, maintain it there, producing the desired fusion power for the desired duration and then terminate the plasma safely. This has to be done in a ch…
-
UKAEA-STEP-PR(24)122024
Ensuring tritium fuel self-sufficiency while maintaining continuous and high specification fuel flow to the tokamak via a low tritium inventory and controllable fuel cycle is a significant challenge to the STEP plant design. Effective and high-quality fuelling and exhausting is required to sustain and control a stable plasma, whereas fuel suffic…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-STEP-PR(23)162023
During development of the UKAEA’S Spherical Tokamak for Energy Production (STEP), assessment of manufacturing strategies for the inboard shield identified several gaps in knowledge. Limits arose from the modularization of this component, geometric constraints of tungsten ceramic forming, joining with low-activation interlayers and dissimilar j…
-
UKAEA-CCFE-PR(23)1152023
This article starts with a brief description of two new viewing systems with a light path which crosses the biological shield wall and are compatible with Deuterium-Tritium (D-T) operations in JET. However, it focuses on the optical modelling and engineering design of one of them which is a multiple camera system producing a wide angle view (WAV)…
-
UKAEA-CCFE-PR(23)092023
Following from the paper describing the remote wide angle viewing system compatible with Deuterium-Tritium operations. This is the second article describing a second remote line of sight, this time focusing on the imaging of the divertor region in JET. It explains in detail the optical and engineering designs of constructing an optical relay which …
-
UKAEA-CCFE-PR(20)1192020
Supramolecular chemistry offers an exciting opportunity to assemble materials with molecular precision. However, there remains an unmet need to turn molecular self-assembly into functional materials and devices. Harnessing the inherent properties of both disordered proteins and graphene oxide (GO), we report a disordered protein-GO co-assembling sy…
-
2019
Data on erosion and melting of beryllium upper limiter tiles, so-called dump plates (DP), are presented for all three campaigns in the JET tokamak with the ITER-like wall. High-resolution images of the upper wall of JET show clear signs of flash melting on the ridge of the roof-shaped tiles. The melt layers move in the poloidal direction from the i…
-
UKAEA-CCFE-CP(20)862018
Nuclear fusion is the process that heats the stars by the collision of atomic nuclei which fuse together to form heavier elements and release energy. The generation of energy using this process has several advantages: no carbon emissions, abundant fuel supplies, efficiency, reliability and operationally safe. One way to achieve the necessary con…
-
UKAEA-CCFE-PR(20)642018
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
Showing 1 - 10 of 19 UKAEA Paper Results