-
2005
Tritium accumulating in codeposits in the gaps between plasma facing components is a safety concern in next step fusion machines as suitable removal techniques have yet not been developed. We report on Imaging Plate measurements of the tritium areal distribution on the side surface of graphite/CFC tiles installed in the TFTR bumper limiter and JET …
-
2005
JET has operated with divertors of differing geometries since 1994. Impurities accumulated in the inner leg of all the divertors, and operation of the first (Mk I) divertor with beryllium tiles demonstrated that most are eroded from the main chamber walls and swept along the scrape-off layer to the inner divertor. Carbon deposited at the inner dive…
-
2005
The accuracy of process measurements of tritium with conventional ion chambers is often affected by surface tritium contamination. The measurement of tritium in the exhaust of the JET torus is particularly difficult due to surface contamination with highly tritiated hydrocarbons. JET’s first unsuccessful attempt to overcome the contamination prob…
-
2005
Operation of the JET Neutral Beam Injectors with tritium is described. Supplying the tritium feed via the special electrically grounded gas feed compromised the performance of the up-graded high current triode Positive Ion Neutral Injectors (PINI) due to gas starvation of the source and the methods adopted to ameliorate this effect are described. A…
-
2005
‘Trace Tritium Experiments’ (TTE) were successfully performed on JET in 2003. The Campaign marked the first use of tritium in JET plasmas since the Deuterium- Tritium Experiment (DTE1) Campaign in 1997, and was the first use of tritium in experiments under the EFDA organisation with the UKAEA as JET Operator. The safety and regulatory preparati…
-
2005
Operation with tritium plasma led to contamination of the JET in-vessel components with tritium at a level exceeding 12kBq/g, which is the Low Level Waste (LLW) threshold in the UK. Carbon tiles used at JET for protecting the pumped divertor and inner wall against heat and neutron flux create one of the Intermediate Level Waste (ILW) streams to dea…
-
2005
-
2005
A cryosorption panel test arrangement was installed in the Cryogenic Forevacuum (CF) Subsystem of the Active Gas Handling System (AGHS) at JET. The pump panels were of ITER relevant design in terms of geometry and dimension, coating and sorbent material. The central objective of this investigation was to study, for the first time in such an in-dept…
-
2004
On the Joint European Torus ( JET ) , a key source of calibrated electron temperature T e profiles is from the measurements of the full electron cyclotron emission ( ECE ) spectrum made by a Fourier transform spectrometer ( FTS ) . It is absolutely calibrated by using a calibration source inside the vacuum vessel. High spatial and temporal resoluti…
-
2004
The motional Stark effect ( MSE ) diagnostic on the International Thermonuclear Experimental Reactor will need to guide the light through a labyrinth of mirrors to provide neutron shielding. Knowledge of how the mirrors change the polarization is essential for accurate determination of the q profile. The optical properties of the plasma facing mirr…
Showing 471 - 480 of 510 UKAEA Paper Results