-
UKAEA-CCFE-PR(20)1202019
A Doppler coherence imaging spectroscopy diagnostic has been developed on the HL- 2A tokamak for scrape-off-layer impurity plasma flow measurements. Two- dimensional imaging of line-averaged C2+ flow in the high-field-side scrape off layer with time resolution up to 1 ms, has been achieved successfully by this system. The spatial angular resolut…
-
UKAEA-CCFE-PR(20)052019
Resistive plasma response to the n = 1 (n is the toroidal mode number) RMP field is systematically investigated for a high-beta hybrid discharge on ASDEX Upgrade. Both linear and quasi-linear response are modelled using the MARS-F and MARS-Q codes, respectively. Linear response computations show a large internal kink response when the plasma centra…
-
UKAEA-CCFE-CP(19)282019
A detailed cross-device investigation on the role of filamentary dynamics in high density regimes has been performed within the EUROfusion framework comparing ASDEX-Upgrade (AUG) and TCV tokamaks. Both devices have run density ramp experiments at different levels of plasma current, keeping toroidal field or q95 constant in order to disentangle the …
-
UKAEA-CCFE-PR(19)272019
This report covers the initial progress on the development of material property handbook (MPH) of baseline CuCrZr, within the Materials Engineering Data and Design Integration (MAT-EDDI) of EUROfusion Material Database and Handbook group. Initial drafting of the baseline CuCrZr MPH structure is presented, with inclusion of available data, figure…
-
UKAEA-CCFE-PR(18)612018
Effects of toroidal plasma flow, magnetic drift kinetic damping as well as feedback control, on the resistive wall mode instability in HL-2M tokamak are numerically investigated, using the linear stability codes MARS-F/K (Liu Y Q et al 2000 Phys. Plasmas 7 3681, Liu Y Q et al 2008 Phys. Plasmas 15…
-
UKAEA-CCFE-PR(18)552018
A long-term high-temperature testing stress rig has been designed and fabricated for performing in situ neutron diffraction tests at the ENGIN-X beamline, ISIS facility in the UK. It is capable of subjecting metals to high temperatures up to 800°C and uniaxial loading under different boundary conditions including constant load, constant s…
Showing 21 - 26 of 26 UKAEA Paper Results