-
UKAEA-CCFE-PR(22)042022
The small punch test (SPT) has been widely used to evaluate the mechanical properties of materials for the nuclear industry due to its advantage of requiring minimal sample volumes. In this paper, the correlation between SPT and uniaxial tensile testing (UTT) is investigated for three materials used in the plasma-facing components of fusion reactor…
-
UKAEA-CCFE-CP(23)212021
Sandwich-type cooling pipes of the first wall of future fusion nuclear reactors (i.e. DEMO) will likely consist of tungsten brazed to a Reduced Activation Ferritic Martensitic (RAFM) steel. Under a high heat flux (HHF) (1-5 MW/m2) the mismatch in thermal expansion between tungsten and steel results in significant thermal stresses in the brazing …
-
UKAEA-CCFE-CP(23)202021
Disruption prediction and avoidance is critical for ITER and reactor-scale tokamaks to maintain steady plasma operation and to avoid damage to device components. The present status and results from the disruption event characterization and forecasting (DECAF) research effort are shown. The DECAF paradigm is primarily physics-based and provides q…
-
UKAEA-CCFE-CP(23)152021
In preparation for high fusion plasma performance operation of the newly operating spherical tokamak MAST-U, the equilibrium and stability properties of plasmas in the MAST database, as well as projections for MAST-U, are explored. The disruption event characterization and forecasting (DECAF) code is utilized to map disruptions in MAST, particul…
-
UKAEA-CCFE-PR(21)752021
Eurofer97 steel is a primary structural material for the plasma facing-components of future fusion reactors. Laser welding is a promising technique that can overcome the challenges of remote handling and maintenance. However, the interaction of the induced residual stress distribution with the heterogeneous microstructure may degrade the mechanical…
-
UKAEA-CCFE-PR(21)592021
The plasma-facing components of future fusion reactors, where the Eurofer97 is the primary structural material, will be assembled by laser-welding techniques. The heterogeneous residual stress induced by welding can interact with the microstructure, resulting in a degradation of mechanical properties and a reduction in joint lifetime. Here, a Xe
-
UKAEA-CCFE-PR(21)572021
Small punch testing was carried out on Copper-Chromium-Zirconium alloy subjected to two heat treatment conditions –both quenched and one subjected to subsequent aging. The variation in the load displacement characteristics associated with the testing was attributed to differences in plastic and damage properties evolved as a consequence of these …
-
UKAEA-CCFE-PR(21)482021
Atom probe tomography and related methods probe the 3D architecture of a material. Which software tools microscopists use and how these tools are connected into work flows makes a substantial contribution to the accuracy and precision of a materials characterization experiment. Typically, the tools of a specific community adapt results and methods …
-
UKAEA-CCFE-PR(21)392021
A recently updated version of the MARS-F code [Y. Q. Liu et al. Phys. Plasmas 7, 3681 (2000); L. Li et al. Phys. Plasmas 25, 082512 (2018); G. L. Xia et al. Nucl. Fusion 59, 126035 (2019)] is utilized to numerically investigate the plasma screening effect on the applied resonant magnetic perturbation (RMP) field, assuming various equilibrium flo…
-
UKAEA-CCFE-PR(21)252021
We present modifications of the systems code Process that allow for a description of a general class of stellarator power plants, based on a stellarator coil-set and the respective MHD plasma equilibrium. For this, we modify Process such that each stellarator confi…
Showing 21 - 30 of 72 UKAEA Paper Results