-
UKAEA-CCFE-PR(25)3052025
The MAST Upgrade Super-X divertor is typically seen to detach in steady state discharges. However, divertor re-attachment is observed to occur during fast transient heat loads. In this paper the effect of edge localised modes (ELMs) on the divertor are diagnosed on fast time scales with Thomson scattering and with a new ultrafast divertor spectrosc…
-
UKAEA-CCFE-PR(25)3112024
2D electron density profiles obtained from coherence imaging spectroscopy in different MAST-U divertor conditions are compared. The data includes variations of strike point position, core electron density, and heating power. The improved performance of the long-legged divertors results in a lower electron density and particle flux at the target com…
-
UKAEA-STEP-PR(24)182024
This paper presents a comprehensive overview of the preliminary divertor design and plasma exhaust scenario for the reactor-class Spherical Tokamak for Energy Production (STEP) project. Due to the smaller size of the machine, with a major radius less than half that of most DEMO concepts, the current design features a double-null divertor geometr…
-
UKAEA-CCFE-PR(24)2142024
In order to test the capability of the full electromagnetic DYON to predict the plasma initiation feasibility of individual discharges and thus the operating space in the device, a dedicated experimental database was built in MAST-U by scanning the prefilled gas pressure $p_0$ and the induced loop voltage $V_{loop}$ (3 failed breakdown discharge…
-
UKAEA-CCFE-CP(25)152023
Reduced plasma models play a pivotal role in swiftly interpreting experiments, exploring different reactor design points, and providing consistency checks for high-fidelity simulations. This presentation focuses on reduced models for plasma detachment onset and transient reattachment timescales, assessing their validity across ASDEX Upgrade, JET…
-
UKAEA-CCFE-CP(24)142023
Accurate quantification of the power loss channels and overall power balance of the plasma is essential for the safe operation of current and future fusion devices. The relative magnitudes of core radiation, SOL radiation and divertor target heat loading are determining factors in both PFC design and plasma scenario design in the successful real…
-
UKAEA-CCFE-PR(24)2582023
The integration of good core and edge/pedestal confinement with strong dissipation of heat and particles in the divertors is a significant challenge for the development of fusion energy. Alternative divertor configurations offer potential advantages by broadening the operational space where a device can operate with detached divertors and acce…
-
UKAEA-CCFE-PR(24)2532023
By utilising Field Programmable Gate Arrays (FPGA), in a configuration similar to that of the Mirror Langmuir Probe, it is possible to bias a single probe at 3 precise voltages in sequence. These voltages can be dynamically adjusted in real-time based on the measured plasma temperature to ensure the transition region is always sampled. First result…
-
UKAEA-CCFE-CP(24)042023
A new bolometer camera was installed in the upper divertor chamber of MAST Upgrade between the MU01 and MU02 physics campaigns. Sharing viewing geometry with the existing lower divertor horizontal bolometer camera, this enables direct comparison of the radiated power in the two divertor chambers. We compare the up/down radiation asymmetry in a ran…
-
UKAEA-CCFE-CP(24)032023
Measurements are presented, alongside corresponding interpretative SOLPS-ITER simulations, of the first MAST-U experiments comparing ohmically heated L-mode fuelling scans in Conventional divertor (CD) and Super-X divertor (SXD) configurations. In experiment, at comparable outer mid-plane separatrix electron density, ne,sep,OMP, the maximum lower o…
Showing 1 - 10 of 89 UKAEA Paper Results