-
UKAEA-CCFE-PR(20)052019
Resistive plasma response to the n = 1 (n is the toroidal mode number) RMP field is systematically investigated for a high-beta hybrid discharge on ASDEX Upgrade. Both linear and quasi-linear response are modelled using the MARS-F and MARS-Q codes, respectively. Linear response computations show a large internal kink response when the plasma centra…
-
UKAEA-CCFE-PR(19)712019
Deformation mechanisms of high entropy alloys (HEAs) at cryogenic temperatures have attracted extensive research interest. We used in situ neutron diffraction to study the tensile behavior of a face-centered-cubic HEA at 77 and 15 K and compared its stacking fault energy (SFE) at ambient and cryogenic temperatures. The SFE dropped from 28…
-
UKAEA-CCFE-PR(19)182019
A numerical survey of the plasma response in ASDEX Upgrade ELM control experiments is conducted, to clarify the role of triangularity in the suppression mechanism. The pedestal pressure increases with triangularity consistent with previous work [2], which modestly boosts the peeling response. However, the peeling response decreases with increasi…
-
UKAEA-CCFE-CP(19)162018
Edge Localised Modes (ELMs) in H-mode tokamak plasmas may be controlled or entirely suppressed by applying 3D magnetic perturbations (MPs). The applied perturbation is amplified by the plasma response, and it has previously been established that the size of the peeling component of this response is a reliable indicator for expected ELM control on A…
-
UKAEA-CCFE-PR(18)612018
Effects of toroidal plasma flow, magnetic drift kinetic damping as well as feedback control, on the resistive wall mode instability in HL-2M tokamak are numerically investigated, using the linear stability codes MARS-F/K (Liu Y Q et al 2000 Phys. Plasmas 7 3681, Liu Y Q et al 2008 Phys. Plasmas 15…
-
UKAEA-CCFE-PR(18)562018
The deformation responses at 77 and 293 K of a FeCoNiCr high-entropy alloy, produced by a powder metallurgy route, are investigated using in situ neutron diffraction and correlative transmission electron microscopy. The strength and ductility of the alloy are significant improved at cryogenic temperatures. The true ultimate tensile strengt…
-
UKAEA-CCFE-PR(18)452018
In magnetic fusion devices, unwanted non-axisymmetric magnetic eld perturbations, known as error fields (EF), can have detrimental effects on plasma stability and confinement. To minimize their impact on plasma performances and on the available operational space, it is important to identify the EF sources and develop EF control strategies. MAST Up…
-
UKAEA-CCFE-PR(18)322018
Progress in understanding lower hybrid current drive (LHCD) at high density has been made through experiments and modeling, which is encouraging given the need for an efficient off-axis current profile control technique in burning plasma. By reducing the wall recycling of neutrals, the edge temperature is increased and the effect of parametric inst…
-
UKAEA-CCFE-PR(18)42018
The application of non-axisymmetric resonant magnetic perturbations (RMPs) to low current plasmas in the Mega Amp Spherical Tokamak (MAST) was found to be correlated with substantial drops in neutron production, suggesting a significant degradation of fast ion confinement. The effects of such perturbations on fast ions in MAST have been modelled us…
-
CCFE-PR(17)702017
It has been previously demonstrated in (Li et al 2016 Nuclear Fusion 56 126007) that the optimum upper/lower coil phase shift ΔΦopt for alignment of RMP coils for ELM mitigation depends sensitively on q95, and other equilibrium plasma parameters. Therefore, ΔΦopt is expected to vary widely during the current ramp …
Showing 41 - 50 of 128 UKAEA Paper Results