-
2009
ITER and future superconducting fusion machines need efficient wall conditioning techniques for routine operation in between shots in the presence oi permanent high magnetic field for wall cleaning, surface isotope exchange and to control the in-vessel long term tritium retention. Ion Cyclotron Wall Conditioning (ICWC) based on the ICRF discharge i…
-
2009
The formation of neoclassical tearing modes (NTMs) severely limits the performance of a tokamak plasma by increasing the radial particle and heat fluxes from the core and can even lead to a plasma disruption. Indeed, NTMs are a serious consideration for the next step device, ITER. The appearance of a finite NTM magnetic island requires an initial â…
-
2009
One of the main operational aims of the MAST experiment [1] and the proposed MAST upgrade is to investigate possible mechanisms to control the q-profile and drive off-axis current. Experiments were carried out to determine the extent to which the q-profile may be modified using two different approaches, transient and steady-state. Transient effects…
-
2008
We present the main design options and implementation of an X -mode reflectometer developed and successfully installed at JET using an innovative approach. It aims to prove the viability of measuring density profiles with high spatial and temporal resolution using broadband reflectometry operating in long and complex transmission lines. It probes t…
-
2006
The maximum temperature expected in ITER is in the region of 40 keV and the minimum average density of approximately 310 19 m -3 is also expected. The proven capability, convenience, and port occupancy of the LIDAR Thomson scattering approach, demonstrated on JET, makes it an excellent candidate for ITER. Nonetheless, there are formidable design ch…
-
2006
The Kamaboko III negative ion source, which was designed and built by JAERI, Naka, Japan, is a model 25% in linear dimensions of the reference design ion source for the International Thermonuclear Experimental Reactor ITER neutral beam injectors. The ion source is a magnetic multi-pole, arc discharge, source with 12 tungsten filaments. Cesium is ad…
-
2005
Studies of the safety and environmental impacts of fusion, both of future power plants and of ITER, have shown that a good performance can be achieved. Although it is difficult to anticipate the regulatory regime in which future fusion power stations will be licensed, the areas of public and occupational safety and short and long-term environmental…
-
2004
The generalized Charney-Hasegawa-Mima equation is unstable to a four wave modulational instability whereby a coherent, monochromatic drift wave can drive a band of modes and associated zonal flows unstable. Although initially the fastest growing modes dominate, a secondary nonlinear instability later drives the longest wavelength zonal flow and its…
-
2003
The nature of intermittency, long observed in magnetic fusion devices, was revisited lately [G. Antar et al. , Phys. Rev. Lett. 87 , 065001 (2001)]. It was shown that intermittency is caused by large-scale events with high radial velocity reaching about 1/10th of the sound speed. These type of structures were named ‘‘avaloids.’’ In the pres…
-
2001
High confinement [with H 1 , ITERH- 98 y, 2 ] at b N 2.3 has been found in ASDEX Upgrade discharges with existing m, n 3, 2 neoclassical tearing modes (NTMs). The reason for the high confinement at high b N values is a transition of the NTMs into the so-called frequently interrupted regime. In this regime, the NTM growth is frequently interrupted b…
Showing 91 - 100 of 107 UKAEA Paper Results