-
UKAEA-CCFE-PR(19)402019
CALANIE (CALculation of ANIsotropic Elastic energy) program evaluates an elastic interaction correction to the total energy of a localized object, for example a defect in a solid material simulated using an {it ab initio} or molecular statics approach, resulting from the use of periodic boundary conditions. The correction, computed using a fully el…
-
UKAEA-CCFE-PR(19)392019
Fusion is one of very few options for sustainable, baseload power to the grid that is necessary to meet the energy needs of future generations. The tokamak is the most advanced approach to fusion and, with the construction of ITER, we are approaching power plant conditions. While commercialisation of this key technology is a main driver for tokamak…
-
UKAEA-CCFE-PR(19)352019
We analyse spherical nanoindentation of single crystal copper using two different indenter tips of radii 7.4 and 27 um. The surface deformation surrounding the indents was measured using atomic force microscopy and the elastic rotation fields under the indents were measured using electron diffraction and transmission techniques. Using the measured …
-
UKAEA-CCFE-PR(19)342019
Reduced models coupled to time-dependent axisymmetric vacuum field calculations are used to develop the prefill and feed-forward coil current targets required for reliable direct induction (DI) startup on the new MA-class spherical tokamaks, MAST-U and NSTX-U. The calculations are constrained by operational limits unique to each device, such as the…
-
UKAEA-CCFE-PR(19)302019
Alfven eigenmodes driven by energetic particles are routinely observed in tokamak plasmas. These modes consist of poloidal harmonics of shear Alfven waves coupled by inhomogeneity in the magnetic field. Further coupling is introduced by 3D inhomogeneities in the ion density during the assimilation of injected pellets. This additional coupling modi…
-
UKAEA-CCFE-PR(19)292019
Two high purity tungsten powders, produced via different manufacturing techniques, were characterized to determine size distribution, morphology, thermal properties and flow characteristics and thus, the likely suitability for Laser Powder Bed Fusion (LPBF) production. Specimens from duplicate builds were produced with the two powders and character…
-
UKAEA-CCFE-PR(19)282019
We study the amplitude modulation of the radial electric field constructed from the Langmuir probe plasma potential measurements at the edge of MAST. The Empirical Mode Decomposition technique is applied, which allows us to construct fluctuations on temporal scales of plasma turbulence, the Geodesic Acoustic Mode and these associated with the res…
-
UKAEA-CCFE-PR(19)202019
The paper presents an analysis of disruptions occurring during JET-ILW plasma operations covering the period from the start of ILW (ITER-like wall) operation up to completion of JET operation in 2016. The total number of disruptions was 1951 including 466 with deliberately induced disruptions. The average disruption rate of unintended disruptions i…
-
UKAEA-CCFE-PR(19)182019
A numerical survey of the plasma response in ASDEX Upgrade ELM control experiments is conducted, to clarify the role of triangularity in the suppression mechanism. The pedestal pressure increases with triangularity consistent with previous work [2], which modestly boosts the peeling response. However, the peeling response decreases with increasi…
-
UKAEA-CCFE-PR(19)082019
Intense bursts of suprathermal radiation, with spectral peaks at frequencies corresponding to the deuteron cyclotron frequency in the outer midplane edge region, are often detected from deuterium plasmas in the KSTAR tokamak that are heated by tangential neutral beam injection (NBI) of deuterons at 100 keV. Identifying the physical process by wh…
Showing 141 - 150 of 507 UKAEA Paper Results