-
2013
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project involves a change in JET from a carbon dominated machine to a beryllium and tungsten dominated machine with residua…
-
2013
Plasma Surface Interaction(PSI) effects on plasma burn-through are compared for the carbon wall and the ITER-Like Wall(ILW) at JET. For the carbon wall, the radiation barrier and C2+ influx have a significant linear correlation whereas the radiation barrier in the ILW does not have such a linear correlation with Be1+ influx. The JET data are explai…
-
2013
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of …
-
2012
The chosen materials for plasma facing components for the deuterium/tritium phase of ITER are beryllium and tungsten. These materials have already been widely investigated in various devices like ion beam or electron beam tests. However, the operation of this material combination in a large tokamak including plasma wall interaction, material degrad…
-
2012
This paper presents the DYON simulations of the plasma burn-through phase at Joint European Torus (JET) with the ITER-like wall. The main purpose of the study is to validate the simulations with the International Thermonuclear Experimental Reactor (ITER)-like wall, made of beryllium. Without impurities, the burn-through process of a pure deuterium …
-
2010
An equivalent model of JET polarimeter is presented, which overcomes the drawbacks of previous versions of the fitting procedures used to provide calibrated results. First of all the signal processing electronics has been simulated, to confirm that it is still working within the original specifications. Then the effective optical path of both the v…
-
2010
Massive amounts of data generated by fusion machines (such as JET) require developing automatic methods for data analysis. Edge-localized modes (ELMs) are instabilities occurring in the edge of H-mode plasmas. The aim of this work is to develop an automatic off-line method for identifying and locating ELMs. This method uses Universal Multi-Event Lo…
-
2010
Dynamical systems are often considered immune from memory effects, i.e., the dependence of their time evolution on the previous history. This assumption has been tested for two phenomena in nuclear fusion that are believed to sometimes show sensitivity to the previous history of the discharge: disruptions and the transition from the L mode to the H…
-
2009
Experiments on the Alcator C-Mod and JET tokamaks with identical values of nondimensional variables at the pedestal top are expected to have the same local plasma transport for a ratio > 4 in absolute size and thus can help to clarify other effects in pedestal formation. At the high and low fields (7.9 T, 1.4 T respectively) involved, natural-densi…
-
2008
The last flux surface can be used to identify the plasma configuration of discharges. For automated recognition of JET configurations, a learning system based on support vector machines has been developed. Each configuration is described by 12 geometrical parameters. A multiclass system has been developed by means of the one-versus-the-rest approac…
Showing 201 - 210 of 223 UKAEA Paper Results