-
UKAEA-CCFE-PR(26)4532024
Experimental campaigns at the Joint European Torus with an ITER-like Be/W wall (JET-ILW) with pure deuterium (D), tritium (T) and Deuterium-Tritium (DT) were a unique opportunity to explore various aspects related to the ITER operation. It should also be emphasized that the JET campaign at the end of 2021 included the first tokamak experiments u…
-
UKAEA-CCFE-CP(26)342024
The MAST-U spherical tokamak (ST) is equipped with on-axis and off-axis neutral beam injectors (NBI), external sources of super-Alfvénic fast ions that provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in future burning plasma devices such as STEP or ITER. High performance of MAST-U plasmas rel…
-
UKAEA-CCFE-CP(26)312024
The movement of spectral emission fronts can be used to diagnose the transition into detachment.Measurements of the 2D spectral emission distribution are available in tokamaks via tomographic inversions, but this is more challenging in stellarators due to the lack of toroidal symmetry. The effect of Zeeman splitting can be exploited on W7-X to est…
-
UKAEA-CCFE-PR(25)3982024
Notched small punch test (SPT) specimens with different types of notches have been adopted by many researchers to understand the fracture parameters of materials. However the specimen geometries have not been standardized and the effects of notch type on mechanical properties, failure mechanisms, and stress state of the tested materials need to …
-
UKAEA-CCFE-PR(25)3942024
The MAST-U Super-X divertor provides the opportunity to study fusion plasma exhaust in novel conditions. However, in order to study these conditions advanced diagnostics are required. Following the development of the MAST-U Multi-Wavelength Imaging (MWI) diagnostic, we present the installation of a multi-delay coherence imaging spectroscopy (CIS…
-
UKAEA-CCFE-CP(25)252024
The integrated modelling tool JINTRAC [1] was recently updated and now has the unique capability of fully consistent treatment of Deuterium and Tritium in the whole plasma volume. In this work this is utilized with coupled core-SOL-divertor simulations performed for the ITER 15MA/5.3T DT Q=10 scenario. The work is built on previous simulations publ…
-
UKAEA-CCFE-PR(25)3582024
Parametric study of liquid metal flow in a conducting rectangular duct in a strong, decreasing magnetic field has been performed. Parameters such as the wall conductance ratio, c, the field gradient,
-
UKAEA-CCFE-PR(25)3532024
The separation of lithium and the fractionation of the isotopes by solvent extraction was studied, using benzo-15-crown-5 as an extractant dissolved in a diluent of an ionic liquid and anisole. Equilibrium experiments were carried out in stirred vessels while continuous flow experiments were performed in small channels with 0.5 mm diameter. In the …
-
UKAEA-CCFE-PR(25)3482024
Determining stress and strain in a component of a fusion power plant involves defining boundary conditions for the mechanical equilibrium equations, implying the availability of a full reactor model for defining those conditions. To address this fundamental challenge of reactor design, a finite element method (FEM) model for the Mega-Ampere Spheric…
-
UKAEA-CCFE-PR(25)3442024
By analysing the relative neutron rates measured between multiple fission-chamber (FC) diagnostics – constituting a Fission-Chamber Array (FCA) – the spacial distribution of fusion within a tokamak may be studied. Using the two-FC set-up at MAST-U, analysis methods are presented for both the study of poloidal neutron-emissivity distributions an…
Showing 41 - 50 of 438 UKAEA Paper Results