-
UKAEA-CCFE-PR(23)1482023
Silicon carbide fibre–reinforced silicon carbide matrix (SiCf/SiC) composites are desirable in structural nuclear applications due to their low density, high temperature strength and tolerance to energetic radiation. We have subjected two industrial grades of SiCf/SiC to high energy He²⁺ ion irradiation, up to 10,000 a…
-
UKAEA-CCFE-PR(23)1242023
Beryllium samples from the JET ITER-like wall limiter tiles with either co-deposits or surface cracks caused by melt damage, were immersed into boiling water for 4 h 15 min to simulate and assess the impact of coolant water ingress into a tokamak on the state of Be components. Microscopy of the water-treated surfaces and the residue in the water re…
-
UKAEA-CCFE-CP(22)072022
Neutron spectrum unfolding using activation foils is currently the primary technique planned for measuring the neutron energy spectrum at the first wall of power-generating fusion reactors. Room for improvement in the effectiveness of current foil selection was identified, and a program produced to select foils procedurally in order to maximise the…
-
UKAEA-CCFE-PR(22)392022
In the absence of official standards and guidelines for nuclear fusion plants, fusion designers adopted, as far as possible, well-established standards for fission-based nuclear power plants (NPPs). This often implies interpretation and/or extrapolation, due to differences in structures, systems and components, materials, safety mitigation systems,…
-
UKAEA-CCFE-PR(23)1042021
MAST pedestal data has been analysed, where a pedestal database of 892 shots was obtained, using the new upgraded MAST Thomson Scattering (TS) diagnostic. Various ELM types are discussed, where characteristics and trends of MAST pedestals are shown. The data from the upgraded TS diagnostic confirms pedestal characteristics found in earlier analy…
-
UKAEA-CCFE-CP(23)142021
The high heat fluxes to the divertor during edge localised mode (ELM) instabilities have to be reduced for a sustainable future tokamak reactor. A solution to reduce the heat fluxes could be the Super-X divertor, this divertor configuration will be tested on MAST-U. ELM simulations for MAST-U Super-X tokamak plasmas have been obtained, using JOR…
-
UKAEA-CCFE-CP(21)082021
The pedestal plays an important role in determining the confinement in tokamak H-mode plasmas. However, the steep pressure gradients in this transport barrier also lead to edge localized modes (ELMs) [1]. There is good understanding of the pedestal in type I ELM regimes [2], however, type I ELMs are known to damage plasma facing components and f…
-
UKAEA-CCFE-PR(20)1292018
Typically applied to non-linear simulations of MHD instabilities relevant to magnetically confined fusion, the JOREK code was originally developed with a 2D grid composed of isoparametric bi-cubic Bezier finite elements, that are aligned to the magnetic equilibrium of tokamak plasmas. To improve the applicability of these simulations, the grid-gene…
-
UKAEA-CCFE-CP(20)942018
Edge localised modes (ELMs) are magneto-hydrodynamic (MHD) instabilities that drive filamentary plasma eruptions in high confinement tokamak discharges [1]. Gaining an improved understanding of ELMs is important [2]; in future fusion reactors such as ITER, ELM heat fluxes will need to be limited to ensure durability of divertor materials [3]. A …
-
CLM P751965
Showing 1 - 10 of 33 UKAEA Paper Results