Conference Papers

Showing 1 - 5 of 5 Conference Paper Results
2020
UKAEA-CCFE-CP(20)102
27th IAEA Fusion Energy Conference, Ahmedabad, India, 22-27 October 2018

The JET exploitation plan foresees D-T operations in 2019-2020. With respect to the first D-T campaign in 1998, when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall and will benefit from an extended and improved set of diagnostics and higher available additional heating po…

Preprint
2020
UKAEA-CCFE-CP(19)47
46th European Physical Society Conference on Plasma Physics (EPS), Milan, 8-12 July 2019

Spherical Tokamaks (STs) could provide a route towards a compact fusion reactor due to advantageous properties such as high plasma beta. A GW-scale ST plasma is explored where Q=10 and R=2.5m. In this design 110 MW of NBI is needed to provide 9 MA of noninductive current, where the remaining 12 MA is pressure driven. To penetrate into the core a…

Preprint
2020
UKAEA-CCFE-CP(19)35
46th European Physical Society Conference on Plasma Physics (EPS), Milan, 8-12 July 2019

In high-performance, ITER baseline-scenario pulses (3MA/2.7T) in JET-ILW with high levels (~ 32 MW) of heating power, typically ~ 20-40% of the input power is radiated, predominantly by W impurities, which are sputtered from the divertor targets and reach the confined plasma. Sustained ELMy H-mode operation at such high heating power in JET-ILW …

Preprint
2018
UKAEA-CCFE-CP(18)05
45th European Physical Society Conference on Plasma Physics (EPS), Prague, 2-6 July 2018

Pellets are used in ASDEX Upgrade [1] to control plasma density under conditions of ELM control or divertor detachment. In experiments presented here direct fuelling by gas is negligible. Relative pellet size and pellet deposition are aimed to approach those in ITER but differences still remain. ELMs are controlled by n=2 RMPs in feed forward mode …

Preprint