-
UKAEA-CCFE-PR(24)032024
To design a safe termination scenario for a burning ITER plasma is a challenge that requires extensive core plasma and divertor modelling. The presented work consists of coupled core/edge/SOL/divertor simulations, performed with the JINTRAC code, studying the Q=10 flat-top phase and exit phase of the ITER 15MA/5.3T DT scenario. The modelling uti…
-
UKAEA-CCFE-PR(23)1912023
ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs is contributing to the preparation of ITER scientific exploitation and operation and aspires to exploit ITER outcomes in view of DEMO. The paper provides …
-
UKAEA-CCFE-PR(23)1642023
The present paper is dedicated to the study of the discrepancies encountered in electron temperatures (Te) measurements carried out with Electron Cyclotron Emission (ECE) and Thomson Scattering (TS) diagnostics in the core of the JET tokamak. A large database of discharges has been collected, including high-performance scenarios perform…
-
UKAEA-STEP-CP(24)022022
The UK’s Spherical Tokamak for Energy Production (STEP) reactor design program has recently taken the decision to use exclusively microwave-based heating and current drive (HCD) actuators for its reactor concepts. This is based on a detailed assessment considering all viable HCD concepts, covering the grid to plasma efficiency (), physics applica…
-
UKAEA-CCFE-CP(23)482022
Recent experiments performed in JET at high level of plasma heating, in preparation of, and during the DT campaign have shown significant discrepancies between electron temperature measurements by Thomson Scattering (TS) and Electron Cyclotron Emission (ECE). In order to perform a systematic analysis of this effect, a simple model of bipolar dis…
-
UKAEA-CCFE-CP(23)462022
Accurate and consistent measurements of the electron temperature (Te) profile are paramount for current fusion experiments, like JET, and future devices, such as ITER. In high performance plasmas in JET and TFTR, electron cyclotron emission (ECE) measurements for central Te>5 keV were systematically found to be up to 20%…
-
UKAEA-CCFE-CP(23)282021
An important part of the ITER Research Plan [1] is the Pre-Fusion Power Operation (PFPO) phase, which includes demonstration of H-mode plasma operation and the commissioning of ELM control systems. However, since hydrogen or helium are the main ion species in PFPO plasmas, the L–H power threshold PL–H is expected to be cons…
-
UKAEA-CCFE-PR(21)772021
The optimum conditions for access to and sustainment of H-mode plasmas and their expected plasma parameters in the Pre-Fusion Power Operation 1 (PFPO-1) phase of the ITER Research Plan, where the additional plasma heating will be provided by 20 MW of Electron Cyclotron Heating (ECH), are assessed in order to identify key open R&D issues. The as…
-
UKAEA-CCFE-PR(21)772021
The optimum conditions for access and sustainment of H-mode plasmas and their expected plasma parameters in the Pre-Fusion Operation 1 (PFPO-1) phase of the ITER Research Plan, where the additional plasma heating will be provided by 20 MW of Electron Cyclotron Heating (ECH), are assessed. The assessment is performed on the basis of empirical and…
-
2008
Deviations of the electron function velocity distribution from Maxwellian behavior in the high energy range have been extensively studied during the past two decades. A brief review of the experimental techniques and findings on the subject is given in this paper. There are indications that the electron distribution function in thermonuclear plasma…
Showing 1 - 10 of 10 UKAEA Paper Results
Page 1 of 1