-
UKAEA-CCFE-CP(19)472019
Spherical Tokamaks (STs) could provide a route towards a compact fusion reactor due to advantageous properties such as high plasma beta. A GW-scale ST plasma is explored where Q=10 and R=2.5m. In this design 110 MW of NBI is needed to provide 9 MA of noninductive current, where the remaining 12 MA is pressure driven. To penetrate into the core a 1 …
-
UKAEA-CCFE-CP(19)452019
Spherical Tokamaks offer a number of potential advantages for a future fusion power plant. They have a high ratio of thermal to magnetic field pressure (beta) and strong flows, either of which could result in reduced turbulence. Fewer Toroidal Field (TF) coils and a different geometry offers the potential for new methods of remote maintenance …
-
UKAEA-CCFE-CP(19)442019
MAST has undergone a substantial upgrade [1], featuring among other things several new poloidal field coils mostly distributed around the new closed-throat divertor structure and an enlarged centre column. The considerable changes have required the plasma control software to be substantially re-written. The MAST digital plasma control system […
-
UKAEA-CCFE-CP(19)432019
The resonant detection and measurement of the damping rates of Alfvén Eigenmodes (AEs) is of critical importance to the design of experiments and development of models of AE stability [1]. With the Alfvén Eigenmodes Active Diagnostic (AEAD) on JET, weakly-damped Toroidal AEs (TAEs) have been probed. Theoretical modeling using the Gyrokinetic Toro…
-
UKAEA-CCFE-CP(19)392019
In the present work, global, three-dimensional edge plasma turbulence simulations of a MAST L-mode attached plasma discharge are presented. Our study is based on the drift-reduced Braginskii equations, solved with the STORM module of BOUT++ for realistic MAST parameters in disconnected lower double null configuration. The plasma profiles are evolve…
-
UKAEA-CCFE-CP(19)302019
The JET Real-Time Protection Sequencer (RTPS) co-ordinates responses for magnetic and kinetic actuators to protect the ITER-Like Wall from possible melting events and other undesirable scenarios. It allows programmable stop responses per pulse, based on alarms raised by other systems. The architecture combines a modular run-time application deve…
-
UKAEA-CCFE-PR(19)782019
A new inversion technique is presented for the identification of plasma filaments in wide-angle visible camera data. Direct inversion of camera data onto a field aligned basis is a poorly conditioned problem which is overcome by breaking the analysis into a `psuedo-inversion’ step followed by a `point spread function correction’ step. Camera …
-
UKAEA-CCFE-CP(19)282019
A detailed cross-device investigation on the role of filamentary dynamics in high density regimes has been performed within the EUROfusion framework comparing ASDEX-Upgrade (AUG) and TCV tokamaks. Both devices have run density ramp experiments at different levels of plasma current, keeping toroidal field or q95 constant in order to disentangle the …
-
UKAEA-CCFE-CP(19)222019
Remote maintenance in fusion machines such as JET and ITER relies on sliding interfaces such as bolted joints. Experience in JET, where removal torques much higher than installation values with uncoated bolts is commonplace, led to the installation of experimental bolted assemblies in 2015: the first of its kind in JET. These assemblies included so…
-
UKAEA-CCFE-CP(19)212019
A firm grasp of transport processes perpendicular to the magnetic field line is required in order to understand and predict heat and particle fluxes to divertor components in tokamaks. Perpendicular transport from the hot core into the scrape-off layer (SOL) upstream impacts the SOL profile at the divertor via parallel streaming along the magnetic …
Showing 151 - 160 of 530 UKAEA Paper Results