-
UKAEA-CCFE-PR(24)2682024
Silicon carbide fibre reinforced silicon carbide matrix composite (SiC/SiC) is a key structural material for fusion reactors to allow high temperature operation of liquid lithium breeder blankets. This research investigated the corrosion behaviour of two SiC/SiC composites (using Tyranno SA3 and SA4 fibres) immersed in static liquid lithium at 6…
-
UKAEA-CCFE-PR(21)232021
The work reported in this paper has already been presented internally by placement student Jacob Young at a MAST Physics and Technology meeting on December 17 2020. Therefore it does not require a paper review presentation. Please also note that the paper is proposed for inclusion in a special issue of Plasma Research Express linked to the recent I…
-
UKAEA-CCFE-PR(19)782019
A new inversion technique is presented for the identification of plasma filaments in wide-angle visible camera data. Direct inversion of camera data onto a field aligned basis is a poorly conditioned problem which is overcome by breaking the analysis into a `psuedo-inversion’ step followed by a `point spread function correction’ step. Camera …
-
CCFE-PR(17)412016
Four numerical codes are employed to investigate the dynamics of Scrape-Off Layer filaments in tokamak relevant conditions. Experimental measurements were taken in the MAST device using visual camera imaging, which allows the evaluation of the perpendicular size and velocity of the filaments, as well as the combination of density and temperature as…
-
CCFE-PR(17)252015
The JET Neutral Beam Injection (NBI) system is the most powerful neutral beam plasma heating system currently operating. Optical Interlocks were installed on the beam lines in 2011 for the JET Enhancement Project 2 (EP2), when the heating power was increased from 23 MW to 34 MW. JET NBI has two beam lines. Each has eight positive ion injectors oper…
-
CCFE-PR(15)662015
The thermal performance of a carbon fibre composite-copper monoblock, a sub-component of a fusionreactor divertor, was investigated by finite element analysis. High-accuracy simulations were createdusing an emerging technique, image-based finite element modelling, which converts X-ray tomogra-phy data into micro-structurally faithful models, captur…
-
2014
Properties of point defects resulting from the incorporation of inert-gas atoms in bcc tungsten are investigated systematically using first-principles density functional theory (DFT) calculations. The most stable configuration for the interstitial neon, argon, krypton and xenon atoms is the tetrahedral site, similarly to what was found earlier for …
-
2013
-
2011
The structure and phase stability of binary tungsten-vanadium and tungsten-tantalum alloys are investigated over a broad range of alloy compositions using ab initio and cluster expansion methods. The alloys are characterized by the negative enthalpy of mixing across the entire composition range. Complex intermetallic compounds are predicted by ab i…
-
2006
Laboratory experiment is an attractive method of exploring the plasma physics that may occur in solar and astrophysical shocks. An experiment enables repeated and detailed measurements of a plasma as the input conditions are adjusted. To form a scaled experiment of an astrophysical shock a plasma physics model of the shock is required, and the impo…
Showing 1 - 10 of 12 UKAEA Paper Results