-
UKAEA-STEP-PR(25)282023
Generation of Runaway Electrons (REs) during plasma disruptions, and their impact on plasma facing components, is of great concern for ITER and future reactors based on the tokamak concept. Current STEP (Spherical Tokamak for Energy Production) concept design flat top operating point features a plasma current higher than 20 MA and thus any plasm…
-
UKAEA-CCFE-PR(25)2642023
Advances in edge and scrape-off layer diagnostics have shown that often the ion temperature is higher than the electron temperature in scrape-off layer filaments. We have therefore extended the STORM model beyond the cold ion limit commonly used, to include hot ion effects. We find that filaments are both faster and more coherent than in a cold …
-
UKAEA-CCFE-PR(24)2622023
STORM is a plasma turbulence code capable of simulating 3d turbulence across the full scrape-off layer of a tokamak fusion reactor, using a drift reduced, collisional fluid model. STORM uses mostly finite difference schemes, with a staggered grid in the direction parallel to the magnetic field. We describe the model, geometry and initialisation opt…
-
UKAEA-STEP-PR(24)192023
SOLPS-ITER simulations performed on STEP CDN geometry with Ar, varying D2 fuelling location Fuelling location can be an actuator for impurity compression/enrichment Inner-midplane (IMP) fuelling enhanced Ar compression/enrichment by 1) driving main plasma outflow 2) increasing collision frequency and 3) lowering upstream temperature PFR+IMP fuel…
-
UKAEA-CCFE-PR(24)2512023
The injection of energetic neutral particles into the plasma of magnetic confinement fusion reactors is a widely-accepted method for heating such plasmas; various types of neutral beam are also used for diagnostic purposes. Accurate atomic data are required to properly model beam penetration into the plasma and to interpret photoemission spectra…
-
UKAEA-STEP-PR(24)162023
The STEP (Spherical Tokamak for Energy Production) fusion programme aims to produce net energy as a prototype fusion energy plant in the 2040s. To find an exhaust solution which is compatible with the core, we need to achieve high impurity enrichment. In this study, we investigated the impact of deuterium gas puff location on impurity enrichme…
-
UKAEA-CCFE-PR(23)1892023
The separation of hydrogen isotopes is a vital step in preparing tritium and deuterium fuels for future fusion energy plants. This represents a fundamental challenge to fusion energy since the separation process must be able to handle high throughputs of hydrogen isotopes with a low tritium inventory, as tritium is highly radioactive and hazardo…
-
UKAEA-STEP-CP(23)122023
In order to achieve a compatible solution between the divertors and the core, SOLPS-ITER simulations were performed on STEP (Spherical Tokamak for Energy Production) connected double-null geometry to investigate the possibility of using deuterium (D) fuelling puff locations as an actuator for divertor argon (Ar) retention. Significant reduction of …
-
UKAEA-STEP-PR(23)142023
The tungsten erosion within STEP assuming tungsten main wall and tungsten divertor has been estimated with ERO at the inner and outer divertor, at the inner and outer midplane and at the outboard baffle entrance. Plasma parameters are based on SOLPS simulations applying argon puffing for edge cooling. The modelled peak gross erosion is highest with…
-
UKAEA-CCFE-PR(23)1672023
A nonlinear 4-dimensional drift island theory derived in (Imada et al 2019 Nucl. Fusion 59 046016 and references therein) provides qualitative predictions of the plasma response to a stationary neoclassical tearing mode (NTM) magnetic island in a low beta, large aspect ratio tokamak plasma. (Dudkovskaia et al 2021 Plasma Phys. Control. Fusion 63 05…
Showing 11 - 20 of 66 UKAEA Paper Results