-
UKAEA-CCFE-PR(19)572019
By mixing elements with favourable nuclear activation properties to create high-entropy alloys, it may be possible to create a material that can withstand a nuclear fusion environment while minimising the radioactive waste produced. Such a material could be used in the extreme thermal and irradiation conditions of a fusion blanket. A suite of previ…
-
UKAEA-CCFE-PR(19)422019
High temperature, neutron irradiated single crystal tungsten, with a post irradiation composition of W-1.20±0.11at.%Re-0.11±0.05at.%Os-0.03±0.01at.%Ta was characterised using a combination of Atom Probe Tomography (APT) and Scanning Transmission Electron Microscopy (STEM). APT showed that within nanoscale clusters of Re/Os, the atomic density wa…
-
UKAEA-CCFE-CP(18)122018
RACE has been developing a concept design for the remote maintenance system for the EUROfusion DEMO powerplant. Within the DEMO tokamak, tritium breeding blankets will require periodic replacement which is currently designed to utilize the upper vertical ports at the top of the vacuum vessel. This operation will be challenging due to the scale of t…
-
2014
The simulation of neutron irradiation–induced transmutation using inventory codes is an important part of the research into materials in various nuclear environments, including fusion, fission, medical physics, nuclear security, and astrophysics. These simulations, even in their simplest form, such as the neutron irradiation of a single pure elem…
-
2012
Lower hybrid current drive (LHCD) with modest powers ( 10% of the total power input) has been used for the first time to completely stabilize performance limiting neoclassical tearing modes in many COMPASS-D tokamak discharges. The stabilizing effect in these experiments is consistent with a reduction in the free energy available in the current pro…
-
2010
It is shown that the transition from L-mode to H-mode regimes in tokamaks can be reproduced using a two-fluid, fully electromagnetic, plasma model when a suitable particle sink is added at the edge. Such a model is implemented in the CUTIE code [A. Thyagaraja et al. , Eur. J. Mech. B/Fluids 23 , 475 (2004)] and is illustrated on plasma parameters t…
-
2007
Experimental cross sections are compared with the results of calculations including all activation channels for the stable isotopes ofMn and Cu, for neutron incident energies below 20MeV as well as up to 40–50MeV. It results that within the former energy range, the model calculations are most sensitive to the parameters related to nuclei in the e…
-
2007
Achieving the economically viable release of energy by the fusion process has proved a major scientific and technological challenge. The nuclear reactions involved in the fusion process are well understood, but the interaction of the neutrons with the materials surrounding the plasma is an area of current research. The neutrons have energies larger…
-
2007
The European Activation System (EASY) has been developed for activation calculations. It comprises the EAF nuclear data libraries and the FISPACT inventory code. A new version (EASY-2007) has been released recently that represents a significant extension of previous versions. It contains neutron-induced, deuteron-induced and protoninduced data that…
-
2007
An overview is presented of the nuclear data required for nuclear design analyses of fusion technology focusing on ITER, the International Thermonuclear Experimental Reactor, and IFMIF, the International Fusion Materials Irradiation Facility. The status of the available data evaluations and libraries is reviewed with regard to the required material…
Showing 21 - 30 of 47 UKAEA Paper Results