-
UKAEA-CCFE-PR(21)592021
The plasma-facing components of future fusion reactors, where the Eurofer97 is the primary structural material, will be assembled by laser-welding techniques. The heterogeneous residual stress induced by welding can interact with the microstructure, resulting in a degradation of mechanical properties and a reduction in joint lifetime. Here, a Xe
-
UKAEA-CCFE-PR(21)572021
Small punch testing was carried out on Copper-Chromium-Zirconium alloy subjected to two heat treatment conditions –both quenched and one subjected to subsequent aging. The variation in the load displacement characteristics associated with the testing was attributed to differences in plastic and damage properties evolved as a consequence of these …
-
UKAEA-CCFE-PR(21)482021
Atom probe tomography and related methods probe the 3D architecture of a material. Which software tools microscopists use and how these tools are connected into work flows makes a substantial contribution to the accuracy and precision of a materials characterization experiment. Typically, the tools of a specific community adapt results and methods …
-
UKAEA-CCFE-PR(21)392021
A recently updated version of the MARS-F code [Y. Q. Liu et al. Phys. Plasmas 7, 3681 (2000); L. Li et al. Phys. Plasmas 25, 082512 (2018); G. L. Xia et al. Nucl. Fusion 59, 126035 (2019)] is utilized to numerically investigate the plasma screening effect on the applied resonant magnetic perturbation (RMP) field, assuming various equilibrium flo…
-
UKAEA-CCFE-PR(21)252021
We present modifications of the systems code Process that allow for a description of a general class of stellarator power plants, based on a stellarator coil-set and the respective MHD plasma equilibrium. For this, we modify Process such that each stellarator confi…
-
UKAEA-CCFE-CP(21)042021
The use of small specimen test techniques (SSTT) to determine mechanical properties of irradiated materials has been studied over the previous decades both in fission and fusion programs, but also to characterise and optimise new materials by nuclear and non-nuclear communities. Currently a number of activities are running that focus on the standar…
-
UKAEA-CCFE-PR(21)122021
Small punch creep (SPC) testing represents an effective way to rapidly assess the creep performance of novel materials and potentially monitor degradation of in-service components. Recent progress in standardisation has also led to improvements in data analysis. However, estimation of equivalent uniaxial stresses is still somewhat challenging and h…
-
UKAEA-CCFE-PR(21)032021
The resistive wall mode (RWM) control on the HL-2M tokamak is simulated with the MARS-F code [Liu Y Q et al 2000 Phys. Plasmas 7 3681], aiming at quantifying control current and voltage requirements when more realistic issues are taken into account, i.e. the control power saturation and the sensor signal noise. The fluid model predicts a narrow st…
-
UKAEA-CCFE-PR(21)022021
In quiescent H-mode (QH-mode) regime, edge harmonic oscillations (EHOs) are believed to provide necessary radial transport to prevent occurrence of large edge localized modes. A systematic modeling study is performed here on the low-n EHOs in a DIII-D QH-mode plasma [Chen et al. 2016 Nucl. Fusion 56 076011], by utilizing the MARS-Q code [Liu et a…
-
UKAEA-CCFE-PR(23)852020
Assessment of the limits of stability of tokamak plasmas is key to operation in high fusion performance ranges without disruption of the plasma current. Projected equilibria have been generated for the MAST-U spherical tokamak experiment, an upgrade of the previous MAST device, in order to prepare for operation. These equilibria are scanned in p…
Showing 21 - 30 of 67 UKAEA Paper Results