-
2014
The DEMO Active Maintenance Facility (AMF) would be used for the storage, handling and processing of In- Vessel Components (IVC) throughout their time on site, the only exception being the time that they are installed in the vessel. It is anticipated that all handling operations associated with used components will have to be carried out using remo…
-
2014
The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk…
-
2014
The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Reevaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from…
-
2014
Sawtooth control using steerable electron cyclotron current drive (ECCD) has been demonstrated in ASDEX Upgrade plasmas with a significant population of energetic ions in the plasma core and long uncontrolled sawtooth periods. The sawtooth period is found to be minimised when the ECCD resonance is swept to just inside the q = 1 surface. By utilisin…
-
2014
In 2011/12, JET started operation with its new ITER-Like Wall (ILW) made of a tungsten (W) divertor and a beryllium (Be) main chamber wall. The impact of the new wall material on the JET Ion Cyclotron Resonance Frequency (ICRF) operation was assessed and also the properties of JET plasmas heated with ICRF were studied. No substantial change of the …
-
2014
In the framework of the Ion Cyclotron (IC) antenna design, ITER Organization requested qualification tests on sliding Radio-Frequency (RF) contacts, to verify that these contacts (quality class 1) are designed appropriately to guarantee a sufficient operational life time. These RF contacts will be integrated into the antenna structure at different …
-
2014
If mankind is to explore the solar system beyond the confines of our Earth and Moon the problem of radiation protection must be addressed. Galactic cosmic rays and highly variable energetic solar particles are an ever-present hazard in interplanetary space. Electric and/or magnetic fields have been suggested as deflection shields in the past, but t…
-
2013
CCFE perform Monte-Carlo transport simulations on large and complex tokamak models such as ITER. Such simulations are challenging since streaming and deep penetration effects are equally important. In order to make such simulations tractable, both variance reduction (VR) techniques and parallel computing are used. It has been found that the applica…
-
2013
The mark-recapture method was devised by Petersen in 1896 to estimate the number of fish migrating into the Limfjord, and independently by Lincoln in 1930 to estimate waterfowl abundance. The technique can be applied to any search for a finite number of items by two or more people or agents, allowing the number of searched-for items to be estimated…
-
2013
The LIDAR Thomson scattering concept was proposed in 1983 and then implemented for the first time on the JET tokamak in 1987. A number of modifications were performed and published in 1995, but since then no major changes were made for almost 15 years. In 2010 a refurbishment of the diagnostic was started, with as main goals to improve its performa…
Showing 71 - 80 of 107 UKAEA Paper Results