-
UKAEA-CCFE-PR(25)2892023
This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to …
-
UKAEA-CCFE-PR(23)1802023
-
UKAEA-CCFE-PR(23)1442023
A dataset of baseline DT plasmas with peripheral HFS fuelling pellets has been produced on JET, in order to mimic the situtation in ITER. During the pellet ablation phase prompt particle losses due to pellet triggered ELM can be detected. Regarding pellet deposition, the data indicate that plasmoids drift velocity might be smaller than predicted…
-
UKAEA-CCFE-PR(22)482022
The evolution of SOL density profiles and fluctuations have been studied at different recycling levels in 3 different tokamaks, ASDEXUpgrade, TCV and JET, all operated in HMode. In all devices we clearly observe an increase of far SOL efolding length at high …
-
UKAEA-CCFE-CP(23)612021
The relative role of particle transport and edge fuelling in setting the H-mode density pedestal is still a key open question [1]. Although reduced pedestal models have proven successful in predicting the pedestal pressure for a wide range of plasma scenarios [2,3,4], they lack a first principle based, predictive model for the edge density. Pred…
-
UKAEA-CCFE-CP(23)132021
JET has investigated one the key issues for the baseline scenario in ITER, the integration of a radiative divertor for heat load control with the use of neon and nitrogen as seed impurity. A characterization of the choice of the impurity seed on plasma confinement, neutrons, pedestal MHD stability, pedestal instabilities, core transport is given…
-
UKAEA-CCFE-PR(19)522019
This work describes the behaviour of the global energy and particle confinement on JET observed in a massive database of H-mode plasmas covering almost whole lifetime of JET operations, both with carbon and metal wall. The analysis is focused on type I ELMy H-modes in stationary phases. It is shown that plasma density in that regime is determined m…
-
CCFE-PR(17)162015
Recent JET-ILW [1,2] experiments reiterated the importance of tuning the plasma fuelling in order to optimize ion cyclotron resonance frequency (ICRF) heating in high power H-mode discharges. By fuelling the plasma from gas injection modules (GIMs) located in the midplane and on the top of the machine instead of adopting the more standardly used di…
-
2014
In 2011/12, JET started operation with its new ITER-Like Wall (ILW) made of a tungsten (W) divertor and a beryllium (Be) main chamber wall. The impact of the new wall materials on the JET Ion Cyclotron Resonance Frequency (ICRF) operation is assessed and some important properties of JET plasmas heated with ICRF are highlighted. A 20% reduction of t…
-
2014
In 2011/12, JET started operation with its new ITER-Like Wall (ILW) made of a tungsten (W) divertor and a beryllium (Be) main chamber wall. The impact of the new wall material on the JET Ion Cyclotron Resonance Frequency (ICRF) operation was assessed and also the properties of JET plasmas heated with ICRF were studied. No substantial change of the …
Showing 1 - 10 of 17 UKAEA Paper Results