-
UKAEA-CCFE-PR(23)1522023
This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics. The res…
-
UKAEA-CCFE-PR(23)1512023
Multiphase Fe-based hardfacing alloys, for example Tristelle 5183 Fe-21%Cr-10%Ni7.5%Nb-5%Si-2%C in wt.%, are extensively used for tribological applications, including valves, bearings and drive mechanisms, where two surfaces are unavoidably subjected to loaded sliding contact within engineering systems. In this study, transmission electron microsco…
-
UKAEA-CCFE-PR(23)1472023
Optimisation of REBCO coated conductor tapes specifically for use in nuclear fusion will help improve the magnet component lifetimes in future tokamak reactor power plants. The focus of this work was exploration of a novel approach to irradiation studies on REBCO tapes, utilising multiple magnetic measurements to probe evolution of the REBCO flux-p…
-
UKAEA-STEP-PR(23)112023
We present herein the results of a linear gyrokinetic analysis of electromagnetic microinstabilites in the conceptual high−β, reactor-scale, tight-aspect-ratio tokamak STEP (Spherical Tokamak for Energy Production, https://step.ukaea.uk). We examine a range of flux surfaces between the deep core and the pedestal top for the two candidate flat…
-
UKAEA-CCFE-PR(23)1272023
The high source stability and brightness of field emission gun equipped scanning electron microscopes (SEM) makes them ideal for high-resolution digital image correlation (HRDIC). However, their high initial capital cost can be prohibitive for research organisations and groups. Conventional thermionic SEMs using either a tungsten hairpin or LaB
-
UKAEA-CCFE-PR(23)1262023
Scanning electron microscopy-based is now an established technique, providing full-field strain and displacement measurement at the microscale. Techniques for generating speckle patterns for sub-micron strain mapping are highly substrate dependent but typically rely on applying aggressive conditions which may alter the microstructure of interest…
-
UKAEA-CCFE-CP(23)032023
Fuel retention in the JET-ITER like wall (JET-ILW) has decreased by a factor of 20 compared to operation with a carbon wall [1]. The reduction in retention is due largely to the decrease in chemical erosion of the beryllium main chamber. A reduction in co-deposition of fuel with beryllium has previously been reported in the divertor [2]. However…
-
UKAEA-CCFE-PR(23)172023
Tungsten (W) is considered a leading candidate for structural and functional materials in future fusion energy devices. The most attractive properties of tungsten for magnetic and inertial fusion energy reactors are its high melting point, high thermal conductivity, low sputtering yield, and low long-term disposal radioactive footprint. However, t…
-
UKAEA-CCFE-PR(23)162023
Observations of enhanced fast-ion losses during edge localized modes (ELMs) have been reported in the ASDEX Upgrade tokamak, revealing losses above the injection energy. This suggests that fast ions can be accelerated and lost by the ELMs. Recent analysis delves into the analysis of the ELM-induced losses, suggesting that the fast ions are los…
-
UKAEA-CCFE-PR(23)112023
A prototype infrared video bolometer (IRVB) was succesfully deployed in MAST-U, the first deployment of such a diagnostic in spherical tokamaks. The IRVB was designed to study the radiation around the x-point and has the potential to return emissivity profiles of unprecedented spatial resolution. The system was fully characterised prior installatio…
Showing 101 - 110 of 438 UKAEA Paper Results